Showing posts with label lipo battery chargers. Show all posts
Showing posts with label lipo battery chargers. Show all posts

Booster PAC ES2500 900 Peak Amp 12V Jump Starter

Booster PAC ES2500 900 Peak Amp 12V Jump Starter
  • 900 peak amperes/300 cranking amperes
  • 21" #4 gauge cables, Automatic recharging
  • Industrial grade, Hot Jaw clamps
  • This item cannot be returned and has additional shipping restrictions
  • This item is not for sale in Catalina Island

This charger is awsome. I keep in the trunk of my car, and man it comes in handy. I have only had to re-charge this item 3 or 4 times in the last 2 years. I keep it in my trunk, and even with 1 bar left on the battery gauge it still has no problem jumping off a car. When ever I jump a car off, i just leave it pluged up to the car for an additional 5 or 6 minutes and it replenishes the charge. Its also slim and not too bulky like alot of the other brands I've used in the past. It doesn't have alot of complicated items on it either, it just simply does what its supposed to do, and that means alot in a jam.

Buy Booster PAC ES2500 900 Peak Amp 12V Jump Starter Now

Purchased in November and have used 4x since then (its now mid-february). Used to start my own vehicle with dead battery when there was noone around who could have jumped me (so it was a real life saver), used to help a stranded motorist who was parked in a such away that using typical jumper cables would have been near impossible, used to start a vehicle I was looking at purchasing, and then used to power my cell phone at my desk when the power was out at our office (the 12 volt cigarette adapter is a nice feature). After all of these uses and being kept in the cold car for over 3 months it still didn't even drop a bar!

Read Best Reviews of Booster PAC ES2500 900 Peak Amp 12V Jump Starter Here

I have bought alot of bad boxes in my days of road service, but this one gets my highest grade. I can crank an old 70's clunker until i give up, not the box(excellent cold cranking amps). This power pack will finish the day out with jumping 6 to 8 cars(completly dead batteries or some with no battery) without needing to be recharged for the next days activities. I only charge this unit maybe once a week.

Want Booster PAC ES2500 900 Peak Amp 12V Jump Starter Discount?

Do not hesitate ... if you're looking for a portable jump starter that will start a dead battery -Look no further. Single mom certified! One Monday car dead as doornail. I thought I'd left a light on or something, but research revealed this vehicle to have a history of draining batteries rather unexpectedly. After reading that, I knew I would need a portable jump starter that would not rely on a second vehicle (I drive rural roads). I'm the OCD type that researches every purchase to the hilt. I looked at a LOT of jumpers. I finally took the plunge with the ES2500 and it's a winner! I charged it up at work (upon delivery there) and continued charging overnight at home. In the morning one attempt was all I needed to start my vehicle right up. It's small enough that it sits right in the shallow "storage" area in the "way back." So many of the jumpers on the market are so bulky! That was one of the important features of the ES2500 that convinced me to buy it. That storage area is only about 4.5 5 inches deep. I had no problem fitting the petite (but heavy) ES2500 back there. I didn't want it out in the viewable cargo area, sliding around with every turn. While the +100 dollar price made me hesitate, I am convinced it is worth every penny. I can drive fully confident that a dead battery is not ever going to strand me and my daughter in the middle of nowhere. That peace of mind is a priceless blessing. Oh one last thing... It hadn't even been 24 whole hours from the time I ordered the ES2500 before Amazon had it in my hands. I did not pay for overnight. You Rock Amazon!

Save 55% Off

I have used this to start a multitude of vehicles from a Cat D9(for the ladies that is a big bulldozer) to my bass boat. The one thing I really like about this is it holds its charge for months. This is a very nice piece of equipment all should have in their trunk. And at a hundred dollars, quite a bargain when you need it.

KHOMO: Pink Dock USB Charger SYNC Data Cord for Apple iPod, iPhone & iPad (Including new iPad 3 HD)

KHOMO: Pink Dock USB Charger SYNC Data Cord for Apple iPod, iPhone & iPad
  • Compatible with ALL iPhone models, All iPod models & All iPad models
  • Works with Mac, PC, iPod/iPhone Docks, and more. Supports USB 1.1 and 2.0
  • USB charge and/or sync compatible.
  • 3ft Hot Pink Color USB Cable.
  • Brand: KHOMO Accessories.

The first time I plugged mt iPad into the charger and removed it, it broke and got stuck in my iPad. Please don't waste your money or risk damage to your apple product.

Buy KHOMO: Pink Dock USB Charger SYNC Data Cord for Apple iPod, iPhone & iPad (Including new iPad 3 HD) Now

I am by FAR unhappy with this purchase. I used it a total of THREE times w/ my iPhone to sync to my laptop and charge. It just stopped working without any warning and ZERO wear and tear. I didn't get a chance to do much with this product at all. Total waste of time, energy and $.

Read Best Reviews of KHOMO: Pink Dock USB Charger SYNC Data Cord for Apple iPod, iPhone & iPad (Including new iPad 3 HD) Here

first of all.. it's not quite that shade of dark hot pink.

it's a bit lighter but its ok. it works just fine for my ipod 4th gen tho sometimes when i have certain cases on it

it's kinda hard for it to make a connection with it.I've had it for a few months well and it still works just fine! recommend.

Want KHOMO: Pink Dock USB Charger SYNC Data Cord for Apple iPod, iPhone & iPad (Including new iPad 3 HD) Discount?

It is compatible with my iTouch and iPad. It is faster than my apple cable when I sync data. I recommanded to my friend. Will buy again.

Save 81% Off

So, I have used the product twice now since it arrived. I use it with my IPhone 4s. I haven't had an issue and seems to be working just fine. The only thing is the color and I see nothing stating "KHOMO," maybe it's not supposed to? It looks more like the COSMO brand then the Khomo. Not really sure. Reason I gave it 3 stars because of the color and brand not showing as in the picture used to describe the item. It's surely not a brighter nor darker pink. It's actually a light pink huge difference form the pic shown. So, over all the product it's self seems to be working just fine. I'm just not a fan of "light" pink sorry. So, if the item looking a different color and what seems to be a different brand other then the one stated/shown (WHICH I COULD BE ABSOLUTELY WRONG ON), then this product will do you just fine! Like I said the item it's self works just fine.

Original OEM Car + Travel Charger + Data Cable For Motorola Droid X Includes DBRoth Microfiber Cloth

Original OEM Car + Travel Charger + Data Cable For Motorola Droid X Includes DBRoth Microfiber Cloth
  • Safely charge your phone using the original authentic brand
  • Use of this official charger will prolong your batteries life compared to others
  • The travel charger allows you to use your phone and rapidly charge your battery at the same time.
  • 100% brand new data cable sync your phone with a computer through this original OEM data cable
  • Using the authentic OEM brand will ensure your phones warranty is never voided!

Even though the Droid X has a good battery, if you use it a lot it will not last the day. This bundle allows you have extra power cords at work and in the car to ensure you can easily recharge your phone.

Buy Original OEM Car + Travel Charger + Data Cable For Motorola Droid X Includes DBRoth Microfiber Cloth Now

Received exactly what I ordered, still on the original factory packaging. It truly was original OEM equipment as advertised.

Read Best Reviews of Original OEM Car + Travel Charger + Data Cable For Motorola Droid X Includes DBRoth Microfiber Cloth Here

I PURCHASED THE MOTOROLA OEM 4 PC. KIT AT A GOOD PRICE AND EVERYTHING WORK GREAT

Want Original OEM Car + Travel Charger + Data Cable For Motorola Droid X Includes DBRoth Microfiber Cloth Discount?

I know the Droid X is an old phone (by now), but when I had my phone plugged into the wall charger, the phone began exhibiting some ridiculously strange behavior such as: opening and closing random apps on its own, opening the messaging app (droid OS default) and typing messages to people in my contact list, creating calendar events with gibberish in the description, and so on. In short, it seemed like my phone was possessed! Never happened with any other charger or when the phone was not plugged in.

I could only attribute it to the wall charger...very weird. Other than that, everything else was great.

Everything was as described. The car charger and data cable work perfectly. Didn't really have much use for an additional wall charger or the screen wipe, but it was a nicely priced bundle. No complaints from me.

Power Wheels battery, 6 volt, Type A connector.

Power Wheels battery, 6 volt, Type A connector.The new batt. holds a charge for a long time. I recieved the shipment in a few days and the price was great.

I am very pleased with the power wheels batteries. They were shipped promptly, and I even received them ahead of time.

Buy Power Wheels battery, 6 volt, Type A connector. Now

This battery came before the day they told me it would and it came precharged! It was also cheaper than I found in the store.

Read Best Reviews of Power Wheels battery, 6 volt, Type A connector. Here

As described. This battery is a second battery so my grandson can drive his car as long as he wants.

Want Power Wheels battery, 6 volt, Type A connector. Discount?

With recent canges to battery style and connections this was an upgrade to pre existing technology. Works well with faster charge time.

Zune Travel Pack

Zune Travel Pack
  • Expansive travel kit for Zune devices
  • Save money by buying all five travel accessories together with this travel pack
  • Rugged, durable Zune gear bag protects your Zune and included accessories
  • The included dual connect remote offers convenient playlist control and two headphone jacks with independent amplifiers
  • Also includes premium earphones, AC adapter, and sync cable; 1-year limited warranty

This is an excellent selection of accessories for the Zune. Though it's marketed as a Travel kit, I find that I use most of the accessories frequently, such as the AC charger and extra synch cable, the much improved earphones, and the remote. I even use the case as it is excellent for keeping all my Zune accessories in one place.

Regarding the case, it is well organized and quite roomy, though it resembles a shaving kit more than a case for a media player. It has a padded socket for the Zune with an elastic strap to hold it secure. It also has a custom fitted place for the earphone case and the AC adapter. The general use storage has plenty of room for the synch cable, remote, additional earphones and such.

The earphones are very good and are quite an improvement over the stock earphones that come with the Zune. There are 3 different sized pads, so this should work for most users who aren't adverse to in-canal earphones. It includes a plastic case that keeps the earphones and pads secure, but is a little unwieldly to wind the cord up and jam it all in. The base is strong and the treble is good, and since these are in-canal earphones, they do an adequate job of blocking out some noise, though they are not noise-canceling.

The remote is actually a nice suprise for me, as I did not expect to find it useful. It's great for keeping the Zune stored away in a jacket pocket or backpack, but still have access to basic functionality like volume or changing tracks. It also does dual purpose as a splitter, so a second listener can jack-in and listen along with you.

The additional synch cable is needed for connecting the Zune to the AC charger, and can also be used for connecting to a PC or an Xbox 360, both of which will charge the device. Having this second synch cable enables me to leave one cable connected to my PC at home all the time, but insures that I always have a cable with my Zune for opportunities to charge, synch or output to an Xbox 360 while away from home.

Strongly recommended for Zune owners.

Buy Zune Travel Pack Now

Amazon needs to provide this information in its description: The wired remote only works with the Zune 30GB. It does not work with the newer Zune 80 or 4 or 8. Even Microsoft is a bit obscure about compatibility. You can find the information in Microsoft's forums.

Read Best Reviews of Zune Travel Pack Here

The travel pack comes with a remote that can attach to your clothing so I don't have to reach for the up/down buttons when I want to skip a song. I attached the clip to the seat belt that crosses over my chest. I am not distracted my taking my eyes off the road. I put my travel pack in my backpack and take it to work. I charge my Zune while sitting at my desk. The premuim earphones are awesome. You can hear the bass in the music and it dorwns out all background noise. You never need to turn up the volume on your Zune while using the premium earphones. I love my Zune accesories.

Want Zune Travel Pack Discount?

The headphones are good, but not great. The charger is just a USB charger with the Zune logo on it. The extra cable is only there so you have something to plug into the USB charger, and the headphone splitter/remote is really only useful if you're planning to share your traveling Zune experience with a 2nd person. And if this is a Travel Pack, why is there no car charger included?

The real draw of this kit is how all of these accessories work along with the case. The case is compartmentalized, so all Zune-branded products fit snugly into predefined niches which keeps everything from rattling around. You can purchase non-branded versions of all these accessories for a lot less money, but if you're really hung up on organization, this is probably the way you want to go.

I've been literally waiting for the mailman each day to deliver the travel pack to me and it finally arrived today. Even though I was very excited about getting it, I was even more excited with actually using the accessories. The case is nice: big enough to fit anything important in it and small enough to travel with. It is also very organized. The adapter's nothing new, it charges the zune (obviously). I suppose its good for when there isn't a computer available, but I already had one, so I didn't care a whole lot. The dual headphone jack controller is extremely convenient. I tend to go on vacation with my family and not everyone in it wants to listen to what's on the car's radio. I can share my music with my friends and family now and not have to either listen to it with the volume too high or the volume to low. I can control how I want to hear the music, and they can control how they hear it. The most fascinating item included were the headphones. I knew that they were supposed to be able to isolate noise, but I didn't realize that it made that much of a difference. As soon as I put them on, everything went silent and the only thing I could hear was the music. However, this does not mean that they necessarily reduce all noise to nothing. At the time I was alone at my house, and as soon as people got home, there was audible noise. I did notice an extreme reduction, though, and am happy that I bought them for the price I paid. Strongly recommended for travelers and non-travelers alike.

Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter

Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter
  • Heavy-Duty Cabinet & Heat Sink With Anti-Skid Rubber Feet
  • Short Circuit & Thermal Protection
  • Electronic Overload Protection With Auto Reset
  • Led Condition Indicators

great 12v power supply!

For those that are looking to run a small to mid range piece of equipment, this baby does the job. I have been using it to power a 50w ham rig, and it works like a champ.

-There are plenty of more expensive ones out there, but whats the point? runs cool and quiet, and is a great price!

-oh, and having both the cig jack as well as power poles(that can accept banana plugs or bare wire) is a great plus

Buy Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter Now

This is a nice power supply. It's regulated so it doesn't interfear with the deviece you are using. I bought this model for 2 reasons. 1) 10 amps

2) Has a lighter plug on the front as well as the pos/neg terminials so you can charge a cell phone or other lighter plug deviece. This P.S. is quiet. I don't hear it when on.

Read Best Reviews of Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter Here

This is my second Pyramid power supply that I use as source for some fairly sophisticated battery chargers for large radio controlled model airplanes. I have seen technical reviews evaluating the power output and these are as clean as units costing significantly more. Great value, 100% reliable (first one two years and going strong), performs exactly as advertised.

Want Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter Discount?

The Pyramid PS15KX 10A 13.8-Volt Power Supply with Cigarette Lighter Adapter is a very reliable power supply. It also protects against shorts and over current. This power supply will work with all 12v products that have less than the 10A current need. Don't be mistaken, you need 13.8v to power 12v products. This is the average voltage that most Automobiles supply on their battery and cigarette lighter plug. I use this supply to power dew heaters for my Celestron CPC 1100 Telescope. This is a well made solid built power supply. I am very satisfied with my purchase.

Save 64% Off

The problem with most DC power supplies is they tend to generate "Hum" into your audio equipment, unless they are well-designed.

This unit is well-filtered and the output is a clean 13.8 VDC.

The lighter port and the DC terminals are very convenient for fast hook-up to just about and 12VDC item you want to run.

I purchased 3 units and am very satisfied with the quality of workmanship.

Mazda MIATA Battery

Mazda MIATA Battery
  • 12 Volt 400 CCA Absorbed Glass Mat (AGM) Battery.
  • Replaces: Fits all Mazda Miatas from 1990 up with correct polarity and battery location in the trunk of the vehicle.
  • Sealed, Maintenance-free battery.
  • Fully charged out of the box.
  • Made in the USA.

I have a 92 Miata and the old Westco died after only 4 years of service. Since this battery is so much cheaper than Westco's now $133 pricetag for something that's made overseas, I figure I'd get this item which is reported to be the same exact unit as the old Westco made by EastPenn Deka with the exact same dimensions. Since mine was the first generation Miata with round vent tubes, the venting outlets should also fit perfectly.

I ordered the item straight from BatteryMart, which uses Google checkout. They also shipped out the package the same day they received my order in the morning. As I need the battery to start my car, it was much appreciated.

However, UPS delivery had a problem since the address was missing my apartment number. I called Batterymart since I was sure I entered the apartment number in the original order (shown in email confirmation), batterymart rep claimed that I would have to pay a $10 fee to correct this error, which I found outrageous (regardless of whose error, since it's really just a simple call to UPS to change the information).

After explaining and verifying that it was something amiss between Batterymart and Google Checkout that they used, the manager was able to "waive" the address-change fee. A bit cynical, I asked for a discount, which the manager named Anthony was nicely able to get (probably through Google) a day later by waiving my shipping charge.

Then the package finally arrived, even though it was delivered to the wrong building (again fault of UPS). The carton looked worryingly small, barely bigger than the battery. Opening it, the suspected problem unraveled: The package was padded by 1/2" of spacer at the top and two longer sides (not four), but the bottom was only padded by a single layer of thin corrugated board with a few crushed shipping foam peanuts. Two corners of the battery was thus damaged, obviously pushed in with creases in the plastic and outer box.

I called UPS to file a damage report, but also contacted BatteryMart via email. I think the damage is as much attributable to UPS as it may be to the woefully inadequate packaging. The battery had been tested to have the proper voltage and appeared functional, though I was not sure if these damages would have repercussions in the long term. I will update if I get a follow-up from the vendor (or not) on replacements or compensation.

Also notable is that the top of the battery doesn't really look like the one in the Amazon photo, which looks exactly the same as the old Deka/Westco battery. The one I received has a slightly different design, arguably looks a bit cheaper with plastic layers instead of an entire block with grooves as the hold-down bar guides; although it's a minor quibble. I also cannot verify from any of the markings that it is indeed made by East Penn (except the shared 81MU1R model number which is also shared with an Autozone wet cell miata battery among others, telling nothing of its true origins).

Nonetheless, it is an AGM as there are no watery slushing noises, or this sort of damage with the package obviously been rolled around would probably have caused a leak already. The hold down clamp in the Miata also fits perfectly over the plastic top pieces. The battery is the exact same size as the old Westco, fitting nicely into the battery tray as well, with some room left over (as Westco is a bit smaller than the original Panasonic AGMs).

I have searched various sources for the proper AGM battery, and most are either much more expensive, or have been replaced by Wet-cell types that are serviceable yet undesirable due to Miata's peculiar battery location in the trunk. It's a pity that if not for the damages, I would have declared this my new source of replacement Miata batteries.

8/20/10

Batterymart responded to my email, less than a day after I dispatched my request. A product specialist named Brad kindly offered to ship me a replacement at no cost, and noted that UPS will probably pick up the damaged package. He also instructed the shipping department to pay extra attention to packaging to avoid damages. I also received a UPS shipment notification, suggesting the package is going out today.

Initially I almost did not expect a reply, much less a positive one, due to the aggressive pricing of the battery itself and that "$10 address-change surcharge" incident. Therefore this level of painless customer service had taken me a bit by surprise. I hope this wraps up nicely, and will update once the replacement arrives.

8/24/10

The replacement battery arrived today. The package is almost 3 times as big as the original that got damaged, suggesting ample padding material. Opening it up, I had to chuckle: the battery was packed to make a point! There was at least 2" of thick corrugated boards protecting the top and bottom, and between 3" and 4" of similar padding by the four sides (see photo). I imagine even the most anal-retentive (e.g. yours truly) would be put at ease with this kind of packing. It would probably survive a drop from a UPS truck while moving!

Needless to say, the battery arrived in perfect condition and tested to be in expected working order. The customer service at Batterymart proved to be responsive and thorough, and promptly righted what could be a messy problem. It's probably a quality most valued from any online vendor, and I appreciated it.

Buy Mazda MIATA Battery Now

Bought this to replace a 7 year old Mazda battery in my 96 Miata. Battery was the same size and poles are correct. The only minor issue is the Battery vents are round and smaller than the Mazda battery. I had to cut the square ends off of the vent hoses and they fit into the round holes on the Marathon replacement battery. Other than that was a quick replacement and has been working well.

Good replacemnet and cheaper than the dealer.

Read Best Reviews of Mazda MIATA Battery Here

According to a number of threads on Miata.net, as well as manufacturer data on other sites, the Marathon MAR-8AM-U1R battery is in fact an Absorption Glass Mat (AGM) battery, NOT a lead-acid type as stated in the description here on Amazon. This also appears to be the same unit sold elsewhere under the Deka brand name, item number 8AMU1R. In any case you can buy with confidence, this is the right battery for your Miata.

Want Mazda MIATA Battery Discount?

BatteryMart replacement battery (made by Marathon Batery) was easy to install and took only about 10 minutes.

I cut the original two "rubber" vent tubes at the top of the round tubing where it met the rectangular section which fitted over the rectangular battery vent (I was replacing a Jhonson Control's battery).

The new battery (Marathon) had circular vent holes so the round "rubber" tubes fit perfectly over the battery's vents.

The new battery had the same terminal orientation as the old battery so the cables fit perfectly.

So for $101.95 (including shipping) and 10 minutes installation timeI was very satified with this purchase. The local Miata dealer had quoted me almost $200.00 for replacing the battery on my Miata.

This battery is a great sub for the Gen 1 (Classic) Prius battery.

It costs less, has vents required for trunk mount and is jell cell.

Length and width are the same, height needs to be shimmed 2 inches.

I used pieces of pressure treated wood pickets for that.

The battery terminals need to be changed to standard auto terminals.

Less than 10 dollars at Auto zone.

A good deal

AGPtek® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type

AGPtek® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type of Charging
  • With automatic lighting control and time functions.
  • Designed with a microcontroller for automatic lighting control functions.
  • 16 field adjustable lighting and timer control options.
  • Detects day and night using the PV array.
  • Suitable for all 12V /24V lamps.

Pros: High power handling, low price, PWM, descaler(?)

Cons: Manual is jibberish, technical data incomplete, display LED has only one segment, the function button feels really cheap

Comments: Before I get into my commentary, a tutorial and some useful information (stuff that should have been in the manual).

1 The charge controller will manage the load automatically.

2 The minimum battery voltage must be 12.35v or the load will cut off.

3 The setting for keeping the load on (without the timer function) is 6.6 (I will call this the normal setting from here on)

4 The load indicator is always yellow (provided you have sufficient battery power)

5 The charge controller won't work without a battery connected to it.

*/TUTORIAL:

The charge controller has a single digit LED mode indicator which has two states (flashing or steady) that indicate whether you are in programming mode (flashing) or display mode (steady). A number may or may not have a decimal point. If it has a (.) to the right of the number, it means that the number is a decimal. No decimal point means that the number you are looking at is a whole number (totally counter intuitive).

* Every time you press the button (if you are in the programming mode), the number will advance to the next higher number.

* A button press will only advance you to the next number.

* Holding the button down will not cause the number to automatically advance.

* Pressing the button will advance the number through all the whole numbers, all the decimal numbers and then cycle back to the beginning of the sequence (0-9 and then .0-.9)

In order to get to the normal setting, you must:

a) Press and hold the button (there is only one button on the far right) until the LED begins to flash.

b) Repeatedly press the button until you get to the number BEFORE the whole number you are trying to set (in my example, until you see the 5)

c) Press and hold the button once again. This will change the number to 6 and it will stop flashing.

** At this point, you have set the controller for 6.x and you will have to repeat the process to get to .6

d) Press and hold the button until the number begins to flash

e) Repeatedly press the button until you get to the decimal number before 6. (in my example, until you see 5.)

f) Press and hold the button once again. This will change the number to 6. and it will stop flashing.

If you have followed all the steps, have your battery connected (charged above 12.35v) and have your solar panel generating sufficient power, LED-1 (far left) will be green, LED-2 (center) will be green and LED-3 will be yellow (indicating that there is power at the load terminals.

End Of Tutorial */

Beyond the little tutorial above, there's not really much to know about the controller itself. It's pretty much a set and forget device. There is not reset button (to restore it to factory default) and no self test mode but for most purposes it shouldn't be necessary.

Another poster stated that the unit can desulfate batteries. I have not verified that but if that is true, then you should also be able to connect this charge controller to a battery charger to recondition batteries (and save on the expense of a standalone desulfator).

Thanks for reading.

Buy AGPtek® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type Now

This charger has been in service for over a week now. Batteries are charged every sunny day.

Keep in mind, this charger will take a max of 360 watts or 30 amps of solar power at 12 volts; 720 watts or 30 amps max at 24 volts. The "Product Description" doesn't say what size wire you can connect to this but I was able to use 8 gauge wire, no problem.

It does have an LED display for lighting options (on the load side) but I haven't tried to use it. Unless you're very good at reading/understanding broken-English, you'll probably have to read the little manual several times to successfully use the Lighting Control. Says it has a 30 amp load capacity.

Are there better 30amp PWM charge controllers available? Yes.. but not for $25!

Read Best Reviews of AGPtek® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type Here

This is an awesome little package. The instructions say that it can use any wire up to #4.

I used a size 8 .... as #8 and #10 are typical wires for solar and electrical. Even the solar for my house uses these size wires.

It does everything I need it to do, plus some. One thing I really needed to know, did it desulfate the batteries. YES IT DOES ... whoo hoo

Very user friendly and easy to use ... it has little pictures on the machine instead of words ... so you know exactly what goes where, and you don't have to worry about losing the instructions.

Want AGPtek® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type Discount?

The broken English manual could really be better. No Support for the product, Not a brand name on it. I bought three and out of the box only one worked the other two. Sill searching for support.If not these two are going back

Save 28% Off

Seams better than the HQRP Solar Power Controller I purchased 7 months age. The fuse blew on it and can not be replaced so I bought this one. It seams to be made better and started charging ion a cloudy day. The Manuel is a bit hard to understand but I was use to the old Manuel.

Midland XT27VP 27-Mile 22-Channel FRS/GMRS Two-Way Radio

Midland XT27VP 27-Mile 22-Channel FRS/GMRS Two-Way Radio
  • Pair of 22-channel FRS/GMRS radios with range of up to 27 miles and high/low power transmit settings
  • Call features include roger beep, call alert, and auto squelch for crystal-clear communications
  • Dual power options--use four standard "AAA" batteries or the included rechargeable batteries
  • Channel scan automatically checks all channels for activity, stopping on any active channels
  • Tough, water-resistant construction for outdoor use; three-year warranty
  • Up To 27-Mile Range
  • 22 Channels
  • Water Resistant
  • Call Alert

This pair of little radios did exactly what I was looking for, and with included batteries and charger in the price were the best value I could find.

I didn't test the radios for the full 27mile range, but they worked perfect within a mile or so while camping. Reception is clear, and never ran into any issues with them not communicating. Battery life was very good.

Buy Midland XT27VP 27-Mile 22-Channel FRS/GMRS Two-Way Radio Now

worked the first time I used them, distance not even close to what was claimed

next time out they were pure static even from close range

sent them back to Midland per their request for replacement, we'll see what happens

UPDATE MAY 9TH

MIDLAND JUST SENT ME A REPLACEMENT. LOOKS LIKE THEY SUBBED THEM WITH A DOWNGRADED MODEL. OH WELL, HOPE THEY AT LEAST WORK

Read Best Reviews of Midland XT27VP 27-Mile 22-Channel FRS/GMRS Two-Way Radio Here

I try a pair of this radios in the sea no more than 1 mile achieved ,in urban area the range is reduced to half. All the 27 miles range is not serious .Not recommended

Want Midland XT27VP 27-Mile 22-Channel FRS/GMRS Two-Way Radio Discount?

Purchased this product but in actuality received a product with less features, when i mailed the seller i was given the worst run around ever for weeks. Finally, i grew tired of it and contacted amazon. Amazon jumped on their case and got me helped within the day.

I had previously posted a negative review about my experience along with email correspondences as proof. They immediately asked me if would remove my review since they were now helping me. In an attempt to retain some leverage I told them I would not delete the review until i received a return shipping label and was credited back on my american express. Now in my opinion, dishonesty deserves dishonesty, i had no intention of deleting the proof of their bad business ethic.

As of today (11-20-12) i was cleaning out my inbox, and i decided to check up on my review for this purchase. LO AND BEHOLD ITS BEEN MAGICALLY DELETED!!! Wonder who it could of been.....

Happy to rewrite my review and this time i will email it to myself so that if it is removed i will be able to copy and paste it with ease.

Save 44% Off

Got these as a Christmas gift for my little brothers needless to say they opened them and threw away all the packaging and when they actually got to use them they didn't work! It shows they were charging and as soon as you key the mic on either of the two they would automatically turn off!!! My little brothers were so upset and I can't even return them because I no longer have the packaging! :/

Hitachi DB3DL2 3.6-Volt 1/4-Inch Hex Drive Screwdriver

Hitachi DB3DL2 3.6-Volt 1/4-Inch Hex Drive Screwdriver
  • Comes with (2) 1.5-amp-hour, 3.6-Volt lithium-ion batteries
  • Handles convert from straight grip to pistol grip
  • Features adjustable clutch with 21-stage torque
  • Built-in LED light for added visibility
  • Comes with a lifetime lithium-ion tool warranty and a 2-year lithium-ion battery warranty
  • Comes with Hitachi's lifetime Lithium-Ion tool warranty

This is my 2nd Hitachi power driver....same one. I had my 1st one for over 3 years , which I totally rely on for work as a PC tech. The forward / reverse switch started getting sticky. I will be sending it in under its life time warranty for repair (a big plus). The new model apprantly is a little thicker with a grip and almost an inch longer....the switch feels better...comes with a brighter LED light...and overall its more quieter / smoother. There's a lot of torque...too much even @ the lowest setting (1) for my personal use most of the time. I also use it for personal home jobs...which has the potential for heavy duty functions. The battery life is good....and uses the same type. It only takes 30 minute for full charge. Great tool!

Buy Hitachi DB3DL2 3.6-Volt 1/4-Inch Hex Drive Screwdriver Now

Before getting into the review, I need to comment that I am a stickler about my tools. I tend to find one brand that has a great reputation, works well for me and proves reliable, and then I usually stick with that brand. Over the past 20 years, I've been particularly pleased with both my Porter Cable and Bosch acquisitions and have centered my tool acquisitions around these fine brands.

After much deliberation, I decided to get the Hitachi DB3DL2 instead of the Bosch PS10-SA. While the Bosch has excellent reviews and a deserved reputation for being extremely powerful, it was a bit "too much" for what I was seeking to do with a small and compact driver. When I need major drilling or driving, I'll always turn to my big PC 19.2V drill/driver. But, when I want a small driver for general light screw driving around the house, I need something that is fairly compact, light, but still plenty powerful. But, not TOO powerful. And, many of the reviews on the Bosch stated that the PS10-2A was just a little too big, and a little too powerful (in fact, it apparently has a reputation for stripping or over-torquing screws).

While I have seen many different Hitachi tools (with very happy owners), I had never really considered purchasing one for fear of going with a new brand. Also, the 3.6V power source concerned me as being "too light, too little". But, I decided to give it a try with the intent on returning the driver if it didn't prove its worth. Well, this little guy is now my primary driver around the house and will be enjoying a long and fruitful life here at home. This is an outstanding tool.

First, the DB3DL2 is very light and comfortable in the hand. It drives screws in an out like a banshee, and you get a really respectable service life out of a single charge. I haven't had any problems driving screws for the installation of window blinds or tight electrical box screws. I've also driven large #8 and #6 screws into wall studs with ease. The clutch system on this driver is excellent for the small driving work for which the system was intended -very easy to dial in and find the correct torque release setting.

The LED lighting on the front of the driver is welcome for dark area work, such as cabinet installation or electrical work (where you don't have a power source for illumination). Battery installation and removal is easy, though the visual cues for battery insertion could be better (it's a hit or miss type insertion where you may have to turn the battery a little to find the correct orientation to complete the insertion). Battery charging is straightforward and only takes about an hour. The folding pistol grip is great when you need to quickly change the orientation of the driver for a little more torque, but it easily converts back to a typical straight driver configuration (which I find I use most of the time).

No real issues to report. It has been a super-reliable, very well designed and made driver which has been a welcome new tool and brand to my tool box. I won't hesitate to purchase another Hitachi tool from this point on, and will include Hitachi as another "preferred vendor", along with Bosch and PC. I highly recommend this fine tool.

PROS:

Perfect feel "in hand" light but stout, perfectly sized (even for someone with gargantuan paws such as me), and a great rubberized grip which gives you confidence when holding the driver. Excellent ergonomics

LED lighting on the front which reasonably illuminates the work area. The Bosch does not have such a light, and that was a major factor in my decision to get the DB3DL2.

Excellent clutch system which is ideally set for the light-duty torquing that this driver was intended to do. It works perfectly and is easy to dial in.

Very strong driver when you need it -this little guy can really crank when you need it (especially if you have the clutch set in drill mode).

So far, great battery life and consistent torque and power.

CONS:

I wish there was a way to lock the handle in either "straight" mode or "pistol" mode. While I've not yet run into a situation where the driver has collapsed while in use, it would provide a nice sense of security when really pushing down hard on the driver in "straight" mode.

The battery is round and keyed, and it will only fit into the grip in one way. However, there isn't any immediate visual cue that says "insert this way only" -such as a pair of identical symbols on battery and grip, or an asymmetrical shape which instantly indicates how the battery should be inserted. Not a big deal as you will find the correct rotation of the battery in a few seconds, but it could be improved.

There is a single LED light on the front of the driver, but it is not directly centered on the work area (offset by about an inch). DeWalt puts three lights on their drivers for consistent illumination of the work area from all angles. Adding one or two additional LEDs would really help in this department.

Read Best Reviews of Hitachi DB3DL2 3.6-Volt 1/4-Inch Hex Drive Screwdriver Here

I purchased this Hitachi screwdriver to replace a Milwaukee 6547-22 2.4-Volt Two Speed Cordless Screwdriver for which I've had to purchase three additional pairs of batteries beside the ones supplied with it. The third replacement set failed after they had only been in use for five months.

Admittedly, I am a very poor steward of batteries I often forget that I have placed them in the charger. Without a near-perfect charger (which experience tells me the Milwaukee is certainly not) NiCad's quickly fail. When subject to the abuse I give them. Again, citing my own experience, LiIon batteries are much more tolerant of the abuse I give them or the currently available chargers are better suited to my form of abuse i.e. I have never had a failed LiIon battery.

The Hitachi screwdriver is almost identically the same size and weight as the Milwaukee but seems to go about three times longer on a freshly charged battery.

They both have the same torque limiting feature and the very handy rocker forward-stop-backward switch and the speed selector switch is in the same place on each. The Hitachi has a positive action bit holder (that I find the be a mixed blessing because I use a magnetic bit holder) and a marginally useful flashlight led.

Hitachi also gives a two-year battery warranty, which may be useful if my prior experience with LiIon batteries does not persist.

On net: The Milwaukee tool has served me well for a very long time and, but for the battery problems, I would never have replaced it in its time, it was a five-star product. I think that the Hitachi screwdriver is a worthy successor.

Want Hitachi DB3DL2 3.6-Volt 1/4-Inch Hex Drive Screwdriver Discount?

I purchased one of these about 2 years ago and have used it daily for my work. This thing is amazing! The adjustable clutch works perfect and even though it's only 3.8v, it will drive in fairly large screws. I have used, abused, and done more with this screwdriver than any other one I have seen. People often comment on it and say "where did you get that"? I think I am going to buy another one just in case they discontinue it.

Save 56% Off

I bought this to primarily use for my son and I's R/C hobby, but it has quickly became a go to tool for around the house jobs as well. It beat's pulling out my heavy 19.2 drill. The battery lasts and lasts and when it starts to fade, just swap it out with the spare ( a nice option as some only come with on battery). The batteries charge quickly as well.

The clutch works flawlessly. It's very sensitive and on the lowest setting is perfect for our r/c cars. They go just far enough that I can finish tightening by hand, which I really like.

The only gripe I have, but is in no way a deal breaker, is I wish there was a way to lock it in either pistol or straight. I hope the hinge doesn't wear out, but since I use it 99% of time in pistol, it shouldn't. Also I like having the option to use it as a straight driver. Some lower priced unit's do not offer this.

For the price, this screwdriver cannot be beat. I have used other's priced twice what this one is and there is no way they are worth it. Give the Hitachi a shot and don't look back!

HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /L

HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /LCD Display plus HQRP UV Tester
  • HQRP®Solar Charge Controller plus HQRP® UV Chain / UV Radiation Health Tester;
  • Work Voltage: 12v / 24v Avto; Continuous load/charge current: 20A;
  • Electronic Protection; PWM Charge Mode (SOC); Microcontroller Digital Accuracy;
  • Full Automatic operation;
  • 200 days warranty!

I set up a basic solar system for my sailboat on a very limited budget using this charge controller. It is rated for up to 300 Watts of solar panels and I have two DMSolar 145 Watt panels that I also bought from Amazon, and 12 guage cables and parallel connectors from HQRP, the connectors now come free with the panels. For $47 I don't think you can find a better value in a charge controller. The controller is extremely easy to use and understand, and is doing a good job of keeping two 125 AH batteries charged up (usually by lunchtime despite drawing the battery bank down to 12.4 V during the night with usage.) My only complaints are about the panel input receptacles, yes it would be nice to use 10 gauge wire and the screws seem barely adequate but the next step up is to a $160 controller. If you have the money, you can buy a programmable WPM controller from Morningstar (the TS45) which allows you to set the charging voltage at a higher voltage (say 14.8) which does make a difference in the amount of energy stored in the battery and perhaps also in their lifespan. Summary: incredible value in a budget priced charge controller for someone with less than 300 watts of panels.

Buy HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /L Now

I purchased three Regulator two of then failed after 4 weeks - At this point , I would have to buy an alternative item to replace the two failed units

Read Best Reviews of HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /L Here

not happy with this product. i was unable to secure the #10 stranded wire into the slots. when i place them in and tightened the tiny little screw IT DID NOTHING. so the wires fell out. i wrote the supplier and they suggested i turn the unit upside down so the wires just lay in the unit and quote"I may be using too large of wire) unit is rated for #6 (that size would never go in) and the solar panels ask for #10. also it was said by the supplier that the unit was made to not hold wires securely. I think this is bogus. No suggestions were made as to return the item. SO FAR I HAVE NOT DONE THE UPSIDE DOWN THING. THIS IS IN AN RV AND I THINK THE ROAD BUMPS WOULD DISLODGE THEM AND THAT WOULD BE A CONSTANT IRRITANT.

Want HQRP 20 Amp 12V / 24V Solar Charge Controller for Solar Energy and Lighting Control 300W with LED /L Discount?

It is not still working but it seems ok. I would like information about similar products on solar energy systems

Keep It Clean SMARTCHG Smartcharge Digital Battery Storage and Charging System

Keep It Clean SMARTCHG Smartcharge Digital Battery Storage and Charging System
  • Ideal for hot rods
  • Maintains your battery
  • Accucharge technology
  • Steady trickle charge

I bought two of these in 2011 for two cars I have in storage. I didn't start one of the cars until October of 2012 and it kept my battery fully charged.

Save 64% Off

iEssentials IESMPHFM iPod/iPhone Digital FM Transmitter with Car Charger-Speakers - Retail Packaging

iEssentials IESMPHFM iPod/iPhone Digital FM Transmitter with Car Charger-Speakers - Retail Packaging - BlackWhat I like about it:

1)Sleek design that matches exactly the style of my ipod touch

What I didn't like about it:

1)Slips out of the ipod rather easily because it lacks the little clips on the sides that some of these connectors have--very annoying.

2)The shaft of this connector that goes into the ipod wasn't long enough to connect properly after I put a rubber case protector on it. Not really the fault of this unit, but the reality is that most people will probably have a similar experience given that you buy this to use with your ipod in the car.

3)Not all channels are available, so if you find a clear channel on your car radio, it might not be available on this unit.

4)Does not scan automatically to find the next clear channel like some of the more expensive models do, so trying to get to a clear channel between this and your car stereo is at least as involved as texting while you drive. I don't recommend doing either. It's a royal pain when you're driving and you start getting interference.

To sum up, I decided to use an old cassette tape converter / connector instead. It makes a little noise due to the plastic gears spinning which is not ideal, but I usually only hear it between songs when no music is playing. (Maybe by now they've improved these and you can get one that doesn't have moving parts that make noise). That said, much better sound quality and not losing your signal and having to adjust your radio station and the station on the FM Transmitter while driving make it a much better option in my opinion.

I'm VERY disappointed with this product. I used it in the car and the transmitter piece was very loose and always fell out of my ipod, causing my ipod to fall down by my feet, under the the passenger seat, etc. while driving. Also, there is only one button on the transmitter to change the station, so if you go past the station you want, you have to keep holding it in until it gets back to the right one. And worse of all, after using this transmitter for about 2 months, it stopped working!!!!!!!!! Every 30 seconds it would turn itself off, so I had to keep pressing the button on the transmitter every 30 seconds. Talk about a p.o.s.! I definitely would NOT recommend this at all. I just bought the Griffin iTrip and I LOVE it! It's about the same price as this piece and works MUCH better!

Buy iEssentials IESMPHFM iPod/iPhone Digital FM Transmitter with Car Charger-Speakers - Retail Packaging Now

Usually FM transmitters of this size lack in quality compared to some of the mount styles out there. This one has really good sound, quality, looks good, and its easy to use. It's really small and compact. The only NON-compact thing about it is the charging cable for the car. I just leave that thing in the glove compartment in case I want to charge my iphone while I listen to it. Otherwise it just works right off of the iphone power and its a self contained FM radio station. They really have a nice balance of price / look / simple use/ and MOST IMPORTANT: QUALITY!!! Awesome I recommend..

Read Best Reviews of iEssentials IESMPHFM iPod/iPhone Digital FM Transmitter with Car Charger-Speakers - Retail Packaging Here

If you only need a charger, that is fine. FM trasmission does not work well, lots of background noise whenever you get a connection, very hard for radios to get connection with this device.... Also it had a loose fit so the phone releases itself often... Only good thing was the charging capability for the iPhone.

Want iEssentials IESMPHFM iPod/iPhone Digital FM Transmitter with Car Charger-Speakers - Retail Packaging Discount?

Delivery time was good, I got it quickly. The problems are that the reception is not the greatest, sound not the clearest but it's better than the radio

stations in my area! The biggest problem I have with mine is that it doesn't click into the Ipod firmly. I can pull it right out without having to press the sides so it often comes out of the Ipod if I hit a bump & the Ipod moves at all. I wasn't willing to pay $75 or more for one though so this is an OK cheaper alternative for occasional use. I wouldn't recommend it for someone who is travelling in the car alot.

Samsung ECS-K1E6BEGSTA Verizon SCH-i405 Vehicle Mount - Car Kit - Retail Packaging - Black

Samsung ECS-K1E6BEGSTA Verizon SCH-i405 Vehicle Mount - Car Kit - Retail Packaging - BlackI was pleasantly surprised to find the vehicle mount *comes with* a car charger cord. It wasn't clear from the description which listed the contents as: Navigation Vehicle Mount, Suction Cup, Dash Mount Pad. Even on Samsung's page it says, "Vehicle Power Adapter not included". My prior cell phone's car charger fit the Stratosphere so I had a cord but I like having a spare for a second vehicle.

Although the item sent is correct for the Stratosphere, the photo shown by the seller is incorrect. It appears to be for the Samsung Gallaxy SII which has a center cut-out for the camera. The Stratosphere's camera is to the side. There is also an opening in this mount to accommodate the phone's speaker.

The automatic Vehicle Mode is very good and a safer option. I like the simplified number of larger icons that appear when the square power lock block is lifted to engage with the phone.

Suction cup is very strong. The Dash Mount Pad is a round black disc with 3M adhesive to stick to the dash. If mounting to the windshield no dash mount pad is needed.

Power cord attaches at the back of the lock block. Also located in the back is the input for the stereo 3.5mm line-out for auxiliary output. This cord is not included. Wish my car had the 3.5mm jack. I would buy the cord.

If you have another car you would like to dash-mount the vehicle mount, I purchased on Amazon the ARKON AP013 Adapter Plate 80mm Circular Adhesive Dash / Console Disc with 3M Adhesive. Very inexpensive at under $3.00. There is a 90mm Arkon disc listed on Amazon so note it's the 80mm one you want.

Very pleased with this purchase.

This item was received quickly and good order; it included the phone holder/clip, suction mount and adhesive mount. The suction mount is pretty darn solid, and you can adjust the holder/clip to any position or angle.

btw, Thanks to other reviewers who posted their own pictures to confirm this was indeed for the Stratosphere. The picture provided by the Seller does not represent the correct mount (though it is quite similar).

Buy Samsung ECS-K1E6BEGSTA Verizon SCH-i405 Vehicle Mount - Car Kit - Retail Packaging - Black Now

Earlier reviews stated surprise that the kit included a vehicle charging cable. Regrettably, that apparently is no longer the case as mine came without it. Initially I purchased this same item from Verizon when I purchased my new phone. The instructions stated that the kit came with a suction mount, a bracket and an auto converter charger. The fine print stated that actual components vary by region. I found that odd, as the only thing that can vary is the charger. I cannot imagine many customers finding the vehicle mount to be very usefull without the suction mount or the bracket. I took the mount back to the Verizon store, where the sales associate was amazed that the instructions stated that a charger was included. She stated that she had never seen one included before. I asked her to confirm that Verizon intentionally charged $39.99 for a couple of chunks of plastic, and she kind of bit her lip and shrugged. She did point out that I got it for $30 on sale because I was getting it with the new phone. I told her that she could keep it and returned it for a $32 refund. I then went online and got this. Even without the charging cable, it is a much better deal than you will get from Verizon.

One other thing. You do have to remove any case you may have purchased for your phone as the bracket is made to fit your phone exactly. The suction mount is very solid, and you can adjust the bracket to just about any orientation, and then lock it there by tightening the adjustment collar. It is a well-engineered mount.

Read Best Reviews of Samsung ECS-K1E6BEGSTA Verizon SCH-i405 Vehicle Mount - Car Kit - Retail Packaging - Black Here

The product arrived in a timely manner.

Looked great and really sturdy.

But my Samsung Stratosphere didn't fit.

I later realized it was because of the protective case I had on it.

I have sent it back and ordered one that adjusts so that I can keep my protective case on the phone.

Want Samsung ECS-K1E6BEGSTA Verizon SCH-i405 Vehicle Mount - Car Kit - Retail Packaging - Black Discount?

This mount is very easy to set-up and makes it safer for calls in the car. Also comes with car charger which is not mentioned in the product description

Save 80% Off

UPG BATTERY APC ES500,ES550,LS500,RBC110,RBC2 12V 7.2AH

UPG BATTERY APC ES500,ES550,LS500,RBC110,RBC2 12V 7.2AH
  • 12v 8ah SLA battery

APC has more than one type of unit that is labeled 'ES500'. This fits ES500 units that have the model number on the bottom 'BE500C'.

This does not fit ES500 units that have the model number 'BE500'! You need this type instead: Replacement Battery Cartridge for RBC46

Check the bottom of your unit to see which you have before you order.

This battery came quickly, looks like it was refurbished, but that's fine with me. Fits my BE500C unit (but not my BE500 unit) and is working fine. I took one star off because of the vague description.

Buy UPG BATTERY APC ES500,ES550,LS500,RBC110,RBC2 12V 7.2AH Now

I got a new un-interrupted power supply at work when my old one began to randomly beep. I was instructed to throw the old one away. I did some research on APC's website, however, and found that the battery on my old UPS had done all it came to do. I priced new OEM batteries and quickly realized they weren't worth the price to salavge this old surge protector, but when I found this one on Amazon, I decided to invest in the battery to have a like-new UPS in my home office. Great way to re-use something that was destined for the landfill!

Read Best Reviews of UPG BATTERY APC ES500,ES550,LS500,RBC110,RBC2 12V 7.2AH Here

The battery in my UPS unit failed after a few years of use and the failure light and beep kept flashing. Fortunately I found an exact replacement on Amazon. I have been using the battery for several months now.

Want UPG BATTERY APC ES500,ES550,LS500,RBC110,RBC2 12V 7.2AH Discount?

arrived quickly and neatly packaged. Put it in my UPS, did not even see the spark. So far it is still working. I would definitely recommend this product.

Save 18% Off

I had an APC backup that died and I decided to try this new battery to see if it would still work and with this new battery it did.