- Quick connect
- Popular Mechanic's Editors Choice Product 2008
- See your battery
- Shows battery condition also during the summer
- Traffic light for battery condition
Fortunately CTEK adopted their quality gasketed interface across all products, and included some unique features along the way. All chargers use one gender and all batteries or things to be charged use a the opposite gender with a rubber cap to protect it when the charger is disconnected. The interface features a snap to hold the two halves together .
For connecting to the battery they make 6, 8 and 10 mm rings, alligator clips, and 2 very special connectors, this being one of them. The second special connector is the CTEK 56-380 Comfort Indicator Panel. Both this input which terminates in 8mm rings and the 56-380 which snaps into most import dash DIN outlets providing you with a convenient place to plug in your CTEK charger (any model) include a blinking (about 1 blink/second) red-yellow-green LED which indicates the present battery level.
How do they do it? For Lead Acid (and also other lead chemistry including SLA, lead calcium, and optima batteries) the standardized test is to charge a battery and desulphate if needed (CTEK has a patented charging system which includes desulphating pulses). Second, the battery is allowed to rest for 24 hours with no charging and no load on the cell. After 24 hours resting a voltage measurement is made which determines how "full" the battery is. The simple rule of thumb (and this is by no means perfect) is that 12.00VDC means the battery is dead while 12.80 means the battery is 100% charged. The scale between 12.00 and 12.80 is roughly linear allowing the observer to determine the state of charge to a rough degree of certainty assuming a linear relationship. 12.40 volts after 24 hours of non-use would indicate the battery is 50% charged and would blink the yellow LED on the 3 LED display. Over 12.5V usually blinks the green LED and below 12.3V blinks the Red indicating you would be wise to charge now.
The only difference in this part of the CTEK system and the one I purchased is the form factor. This accessory does everything mine does but it is for battery systems without a din standard dash (where you would use the 56-380 panel mount charge jack and indicator) here the indicator and charge jack are in a "blob" at the end of 55 cm of cable designed to be wired to the battery. All CTEK features and quality are designed into this accessory.
Buy CTEK 56-382 Comfort Indicator Eyelet Now
This product is CRAP. It shows yellow or red on a fully charged batteries (in all 3 of my cars). It should be called the "Discomfort Indicator." I called the manufacturer and they said they would check into it and get back to me. Never did. CTEK Chargers are great. Hard to believe this product is from the same company.Read Best Reviews of CTEK 56-382 Comfort Indicator Eyelet Here
quality cable and ring terminals. this would be my 3rd product by ctek and i couldnt be happier. the indicator is very nice! i am very happy with this addapterI bought this with the Ctek Multi 7002 charger. It hooks up easily to the battery and gives a nice visual indicator of the battery condition with the colored blinking LED's. If you like all the bells and whistles get this one over the standard comfort eyelet.Have used it on all 4 of my vehicles,including my 1970 muscle car that gets very little use. Works as advertised.
0 comments:
Post a Comment