- High Powered FM Transmitter - Plays Music and Answeres Calls from Car Speakers
- USB Interface - Reads and Plays MP3-WMA Music Files from your phone
- LED Screen Display
- Charge Mobile Phones and Bluetooth Devices with USB Cable
- Adjustable cigarette lighter Mount with Strong sturdy Dock keeps your Device secure while Driving
Nice:
Cheap FM Transmitter
Phone Charger
Phone Holder
Can be used with other devices
Tested on iPhone 4 like a charm
and best of all, all at the same time yes, you can charge and listen to music at the same time!
Cons:
-The stick to hold it is short, on my 95 camry, it had hard time using it and its pushing against my dashboard
shakes a lot while driving
seems to inter fer with Google maps GPS the maps work, but the orientations easily gets out of sync, and keeps saying move the device in the figure (8) motion
i used it with MapQuest MapQuest did not seem to interfere so not sure if its Google Maps, or the iPhone
FM Transmitter is weak it works, but not loud, and does not have much power. While driving during the city, about 90% of the time its clear, and maybe 10% or so not clear (has static) so its not bad, unless you like your music flawless
I dont think the holder will last it looks cheap but so far its holding, lets see for how long
I think this is an iPhone issue, but I cannot hear the calls on the speaker so its problematic if you need to remove it from the holder each time
With a case on the iPhone4, its fit is tight in the holder
Trick to use it to charge and listen at the same time:
Do not use the extra cable from the iPhone to the device, only use the charge cable!
place the music on speaker mode, the connect the charge cable and you are done it charges AND music works from the same cable!
If you keep the extra cable on the top, the you wont hear a thing!
Why 4 star:
static FM, not very loud voice
cannot hear the calls on FM while driving (maybe an iPhone issue, not the device issue)
cheap holder and stick very short
Buy FM Transmitter Car Charger and Mount Compatible with Apple iPod / iPhone Now
I bought this to replace my Griffin iTrip after it shorted out. I was worried about buying a different brand (or a non-brand, as a case seems to be), since the Griffin is able to be set to international frequencies (and I was never able to receive a clear signal without setting it below 88.1).So far, however, the signal has been A LOT clearer at 88.1 than it ever was on my old transmitter. I live in Phoenix and I've had no trouble with signal interruptions so far; I even get a clear sound in parking garages and around strongly broadcast signals, like in shopping center parking lots. The sound quality is also pretty decent for an FM transmitter, especially one that cost less than $20 to buy and ship. I also love the cradle and the flexible neck that allows me to dock my iPod within easy reach.
The remote seems to be a bust, but I don't really care as I can't see a reason to use a remote when my iPod is docked right in front of me. Your mileage may vary, I suppose. And for all I know this might short out in a few months just like my Griffin did, but I'm holding out hope!
Read Best Reviews of FM Transmitter Car Charger and Mount Compatible with Apple iPod / iPhone Here
Over the years I've been through about 15 FM transmitters. This one is by far the best quality I've had. You may hear a little high pitched noise at high volumes, but that is a small price to pay for the amazing amount of clarity provided. The remote control is pretty flimsy and has to be held almost directly next to it to work but that's not the reason I purchased it so I was hardly disappointed. I really don't think you'll find a better product on the market.Want FM Transmitter Car Charger and Mount Compatible with Apple iPod / iPhone Discount?
I received the product today and I am quite happy with it. There are a few odd quirks with this product but overall I am happy with it out the gate.First things first it comes with NO DIRECTIONS. There are a few bullet points on the packaging but thats it. Hopefully this review will give you all you need to know based on what I have discovered fiddling with it.
The device cradles your ipod or mp3 device between padded jaws. They are a little tight coming out the case and i thought I broke them forcing them apart so that my ipod would fit. After a bit I discovered that there is a pushbutton on the lower left of the unit that springs the jaws open to full width. This allows the unit to hold many different ipod and mp3/smartphone models without falling out. There are also 2 tabs on the bottom to prevent you ipod from sliding out if the jaws are loose. One big negative -one of the tabs blocks the headphone jack on the ipod touch. So if you want to put a cable in the headphone jack you have to set it up so your ipod doesn't rest against the bottom tabs.( see enclosed pic)
The device has an LCD display for the transmitter on the top of the unit with 2 up/down frequency buttons and a QS button. For the life of me, I have no idea what QS means. It seems to work like the preset button on the included remote ( more on that later)
The gooseneck on this seems very sturdy and stayed where I put it. I do wish it was a bit longer though so that it would be higher that my shifter. The lighter adapter has a blue power indicator led that is kinda bright. You may want to put a piece of tape over it if you are driving at night.
This things also has a built in usb port for charging devices. I haven' t used it so I cannot comment on the quality of it as a charging station.
Some of the pics show the unit with a 1/8 inch cable that goes from the headphones to the transmitter. This is NOT REQUIRED if you are using an ipod. Just use the ipod connecter and you are good to go. his may be required for phone usage with an iphone but I cannot confirm that. The cable is required if you have another mp3 player like a Sansa fuze.
The sound quality is pretty good. I have had a few FM transmitters for various mp3 devices and this one has the best quality yet so its a winner in that department. Another added plus is that you can use any frequency between 87.1 and 107.9 Mhz. I have had units in the past that only had preset frequencies that would just not work if there were radio stations close by on the same frequency.
The biggest negative about the unit is that the lcd screen with the frequency info is on the top of the unit. If you set it up so that you can see the ipod's screen you wont see the lcd info because it is facing away from you. This is only an issue if you have to change the station while driving otherwise its not that big an issue
This unit comes with a cheap, cheesy looking plastic remote that has some plusses and minuses.
I read a few reviews about the remote that states that you have to be right next to the unit for it to pick up the signal. At first it seemed that I was experiencing the same issue. The remote only seemed to work when I was right next to the unit."Meh", I thought -its only 11 bucks. But as I was fiddling with the unit position I noticed that after a while I could control the unit via remote from a good arm span away. This seemed odd - sometime it would work from far away other times it wouldn't work when it was right next to it. Then I found the culprit. Upon inspection it appears that the remote is an IR emitting remote. IR emitting remotes are directional an require the unit in question to have an IR receiver to capture the signal. From what I can tell the IR receiver is located somewhere in the top left area of the unit. Basically if you can read the radio station lcd your remote should work like a charm.Trouble is, the way this is designed you want to have it so that your ipod is facing you -which means the lcd is facing up which means that the remote ain't gonna be useful. I think this is a shame because, with an ipod touch, it would be much easier to do basic things like pause a track or play the next track without looking at the unit because of the tactile feedback. Since everything on the touch is accessed via the touchscreen you kinda have to look at it instead of the road to do these things.
The remote is an odd little thing. It looks like an old school ipod nano complete with a sticker where the ipod nano screen would be (newsflash the sticker does nothing). The remote allows you to rewind, fast forward, play, pause and increase and decrease volume( these are the "clickwheel" functions). In addition it has a frequency up and down button and a preset button. the preset button does not operate the way I would imagine. when I press it it goes from 88.1 to 88.9 and then 107.1 to 107.9 in .2 increments. If you wanted to use something in-between you are gonna have to use the frequency buttons. I haven't yet figured out how to set a preset (if that is even possible).
Finally I noted that one poster stated that when he tried to use the remote his volume control did not work. I am not positive on this, but I think that is by design. When I pugged my ipod into the unit and ran tune it stated on the display that it was in docked mode and not only could I not change the volume via my remotebut I couldn't adjust the volume on my ipod either. I believe that this is feature apple put in so that when the unit is docked the volume is controlled by the docking device. there is a simple workaround for this though. If you use the supplied 1/8 inch cable to go from your headphone out to the input on the top it treats that ipod ilke it is no longer in docked mode and you can freely change the volume on your ipod or via the remote.
Oh well.
PROS:
Good Transmitter
Tunable to any frequency
Solid Gooseneck
DIRT CHEAP
CONS:
Cant view display in normal position
Remote unusable when unit in normal position
Cannot set presets
0 comments:
Post a Comment