Meind Pure sine wave power inverter 1000W DC 12V to AC 220V for solar power system with battery char

Meind Pure sine wave power inverter 1000W DC 12V to AC 220V for solar power system with battery charge function
  • Voltage: (1)Input Voltage:DC12V (2)Output Voltage:AC220V(3)LOW Voltage Range: <10.5V , High Voltage Range: >DC14.8V(4)Input when Charging battery : AC 110V-240V (5)Output of Charging: DC 13.8V
  • Protection:(1)Soft-Switch Function: Yes (2)Short-Circuit Protection: Yes(3) Reverse Protection: Yes ( +/ - )(4) Over-Load Protection: more than 1000W(5) High-Temperature Protection: more than 95degree will turn off, and re-boot less than 85 degree(6) High-Voltage Protection: DC16V±1V(7) Low-Voltage Protection: DC10.5V±0.5V(8) Fuse: Built-In 4X30A(9) Auto Reboot Function: Yes
  • Cooling system:Cooling Fan: Yes( Automatic: when temperature> 48 degree, will auto-start to cooling, and after <40 degree will off)
  • Battery charge function:(1) Charging Function: Yes (Charging Specification: Constant voltage and trickle current charge when the battery voltage less than 13.8V, after morethan 13.8V floating charge.)(2) Input when Charging battery : AC 110V-240V(3) Output of Charging: DC 13.8V(4) The AMP of Charging: about 10A(5) The Inverter will alarmand cut off when the battery is full of power.
  • Specification (1) Continuous Power output: 3000W(2) Surge Power Capacity:6000W(3)Frequency output:50Hz ±4%(4)Availability Power:no less than 90.5%(5) No Loadcurrent: no more than0.4A(6)Output Wave form:Pure Sine Wave

great production fast shipping must say this sell is very efficient and am very satisfied with it so far I have hook it up working fine with a beep but will check it out ,but at first tried it there was no beep so I guess it my battery

0 comments:

Post a Comment