RoadPro RPBH-012 12V Beverage Heater

• Plugs directly into your lighter/power socket
• Heater coil works directly in beverage container
• Use with glass or ceramic containers only

Hot water in my flask doesn't stay hot enough for a whole day out, and this is a good way to bring my tea or coffee up to temperature. I haven't tried heating water from cold it is always at least warm when I start. It takes several minutes and the wait can be a bit tedious, but it does a good job. The clip which is supposed to hold the heater onto the side of the mug doesn't (it flops about), so I have to hold it to keep it properly immersed. It cools off quickly and is reasonably easy to clean with a small brush.

Buy RoadPro RPBH-012 12V Beverage Heater Now

This is a good product. I use it in a stainless coffee mug in the car. Sometimes the cigarette lighter plug on the Road Pro will melt if you leave it on too long. Radio shack part number 270-1521 is a much more robust plug. I just crunch the old plug up and cut the metal tabs with the wires soldered to them from the original plug and put them in the holes in the Radio Shack heavy duty plug and it is fixed and lasts forever. I leave the LED connected and it indicates when it is plugged in.

Great gadget. Much better than the plug in mugs that fail quickly.

Read Best Reviews of RoadPro RPBH-012 12V Beverage Heater Here

I purchased this item as a gift for my son. He is an over the road truck driver and I thought this would be nice so he could make coffee of a morning. He used it twice and it burned out. It may be that it was just a defective product, but on the other hand at a cost of about $12, it is not worth taking the chance. I would have returned the product, but it may be months before I see him again, and he had already discarded the packaging. My loss could be your gain. Don't buy!

Want RoadPro RPBH-012 12V Beverage Heater Discount?

I bought this item to heat water so that I could keep hot coffee during a 5-day cross-country road trip. (Without having to pull over to purchase it...) The product specifications indicates that the so-called "metal" clip would attach neatly to most "CERAMIC" coffee cups. Firstly, the "metal clip" is NOT METAL but some type of hard plastic. I chose a ceramic cup with the narrowest rim to be sure it would accomodate the space allowed for the clip to engage. However, as soon as I placed the clip on the rim of the my cup, the clip snapped off! (With little or NO pressure!!)

I just finished the trip on Saturday Sept. 4th and any hot coffee during my trip was purchased from various vendors enroute so I wasted $16.98 on the item and shipping cost. WHAT A PIECE OF CRAP!

Save 33% Off

Although the other reviews were not promising I gave it a chance. Wrong! The heater was in pieces on arrival, the tip was unscrewed. I put it back together, used it once and the tip melted. I had used the 110v units years ago and although they didn't last very long, I decided to give this a chance, as I work from a vehicle. Don't waste your time or money.