Showing posts with label marine deep cycle battery charger. Show all posts
Showing posts with label marine deep cycle battery charger. Show all posts

JR Products 70725 Small C-Shaped Drawer Slide Socket Set

JR Products 70725 Small C-Shaped Drawer Slide Socket Set
  • Locks & Catches Drawer Slide Socket-Small 70725 Jr Products

exactly as described, fixed the drawers in our camper and sold it the next day :) We couldn't find these anywhere else at a better price and wanted to get the drawers fixed before it was seen they arrived on time and we didn't have to spend a fortune getting the camper ready for the sale!

Save 21% Off

Amprobe BAT-200 Battery Tester

Amprobe BAT-200 Battery Tester
  • Indicates the amount of charge remaining in standard and rechargeable batteries
  • Adjustable terminal contact caliper tests 1.5V AA, AAA, C, D, and button batteries, and separate terminal contacts test 9V batteries
  • Analog display has color-coded sections for quick reading
  • Measures 7.36 x 4.29 x 1.06 inches/18 x 109 x 27 mm (H x W x D) and can be held in one hand during use
  • Conforms to applicable European Conformity (CE) directives and N10140 Australian standards

It does what I purchased it for at an affordable price. And unlike the Radio Shack battery tester I used before, there is an obvious place where the meter should point without a battery attached, so you know if a fall or other rough handling causes the meter to be improperly "zeroed" (which leads to faulty measurements).

Buy Amprobe BAT-200 Battery Tester Now

It tests most kinds of standard batteries INCLUDING 9 volts. The terminals are on one of the ends. I used it on all of our batteries and found out several devices that didn't work, that we thought were broke, were really just the victims of dead batteries. Easy to test and read. I recycled a dozen batteries that tested bad. I will buy more of them for gifts.

Read Best Reviews of Amprobe BAT-200 Battery Tester Here

This is a pretty simple but effective little product. It does exactly as it's supposed to do, telling you if your batter is good, low, or needs to be replaced. It works with all kinds of regular household batteries. I can already tell Im going to save money because many times when my smoke alarm is beeping or I think other things aren't working correctly because of the battery being dead so I throw it out and replace it, with this battery tester Ive already saved myself from throwing out several batteries just by testing them first to see if the battery is the issue and it turns out it isn't. For the price this is a household must have and I am very happy I purchased this.

Want Amprobe BAT-200 Battery Tester Discount?

Gentlemen,

The tester is simple to operate and provides an easy way to assess the battery status. By not discarding usable batteries it will pay for itself in a short time.

Numan Vasquez

The tester works as advertised, but the construction could be a little better. The red slider is a little flimsy. All of the batteries I tested were easy to check and the results were reliable.

Car DVR Camera Camcorder Recorder w/ 4 LED IR Night Vision and 2.5" LCD

Car DVR Camera Camcorder Recorder w/ 4 LED IR Night Vision and 2.5' LCD
  • Infra-red night-vision with 4-LED light
  • Motion Detect - select this function, it will automatically record if an object moves.
  • 120 degree wide view angle shoot
  • Cycled recording
  • Video: 1280x960, 720x 480, 640x480

this camera is super cheap and could not be easier in installation or use of it. Mine is currently hooked up to my ignition, when I start the car about 10 seconds later the camera is recording. just give the camera power and you will get video, turn the car off and it will save the current video then shut down. I have bought two of these and I love both of them. you can set the camera to record in 2,5,10,15 minute intervals meaning that everytime an interval has passed it will create another video file, and record over the oldest video if the card memory is used up. also this camera has a built in battery so it doesent have to be mounted to anything. you can take the camera any where. also it has a 1/2 inch screw mound on the top so you can screw it into almost any camera mount.

Buy Car DVR Camera Camcorder Recorder w/ 4 LED IR Night Vision and 2.5" LCD Now

This product arrived programed in Russian I got lucky with an online translator and found out the Russian word for language.

Then it worked for about four days till the first reset and finally shut down after the 10Th reset Could not get it to turn on after that and of coarse there's no web site or company associated with the name so your out of the money .....This is junk and is designed to fail!...... Do Not Buy This Product!!!!

Read Best Reviews of Car DVR Camera Camcorder Recorder w/ 4 LED IR Night Vision and 2.5" LCD Here

The camera works ok as was expected, but I also expected to connect it to my computer via the USB cord provided. However, I tried it on several different computers and they all say that the hardware is unsupported. I thought the drivers were on the camera as there wasn't an installation CD inside the package but I was wrong. It is a hassle to return it so I'm stuck with it until I find a better one. If it had an A/V output it would be a better buy also.

Want Car DVR Camera Camcorder Recorder w/ 4 LED IR Night Vision and 2.5" LCD Discount?

It's okay for just few months. Mine died in 6 months. Don't expect night vision feature although it declares so. The farthest distance the 4 LED lights can reach is about 2 feet.

this car dvr camera recorder with night vision is a peace of garbage, this company will send you a opened box missing part,s and the quality of this thing ( that will not take a charge) is very poor then thay will give you the run around.

BestDealUSA Nice Pink USB Data Sync Charger cable For Apple iPod iPhone

BestDealUSA Nice Pink USB Data Sync Charger cable For Apple iPod iPhone
  • Update your iPhone, iPod at high speed with the latest music and data.
  • Dock Connector to USB Cable offers 400mbs throughput for quick transfer of your data.
  • Compatible with the iPhone 3G, iPhone 3GS, iPhone, iPod Touch, iPod Nano, iPod 3rd&4th Generation, iPod Video and iPod Mini.
  • Cable can charge or hotsync while being used.
  • Color: Pink

Cool gift to buy to your girlfriend (if she likes pink)! It comes handy especially when people steal your iphone cable. This time you will notice it!

Buy BestDealUSA Nice Pink USB Data Sync Charger cable For Apple iPod iPhone Now

i was very pleased with the product it really fits the purpose no complaints about this product at all thanks

Read Best Reviews of BestDealUSA Nice Pink USB Data Sync Charger cable For Apple iPod iPhone Here

It works fine, I love the color, It is different from all the other WHITE USB cables in my house,not only is pink my favorite color, but since my USB is the only pink UBS if somebody in the family borrow it I know that it is mine, they cannot say "that's not yours"

Want BestDealUSA Nice Pink USB Data Sync Charger cable For Apple iPod iPhone Discount?

It may not be as high quality as a real ipod charger but it's going the job and for the price it's tough to beat.

I bought this a little less than a month ago... It lasted till about now and the charger cord is starting to fall apart and not work well. Guess you get what you pay for :)

Lenmar PPUKSALL Kickstand Battery 2.0 - External Battery and Desktop Stand for iPhone and iPod

Lenmar PPUKSALL Kickstand Battery 2.0 - External Battery and Desktop Stand for iPhone and iPod
  • Listen to music, watch movies, FaceTime, & more while wirelessly charging your device
  • Compatible with all iPhone generations and most iPods
  • Internal 2000mAh Lithum-Polymer battery gives you up to 2X battery life and adds hours of talk, music, and browsing time. 1 year warranty
  • Includes micro USB cable for simultaneous syncing & charging, plus LED indicators to show power level
  • Compact, rubberized Kickstand is ideal for travel - slips easily into your laptop bag, briefcase, or handbag when not in use. New versatile design works with most iPhone and iPod cases

This little guy has been great for needing extra battery life for my iPhone 4s. Worked wonderfully on a long bus trip to Miami! Quick to charge back up and not discovered any glitches when using it with my iPhone.

Buy Lenmar PPUKSALL Kickstand Battery 2.0 - External Battery and Desktop Stand for iPhone and iPod Now

Great portable option for charging my iPhone!! Charges fast. However, plug is very sensitive and comes in and out of charge mode when I am driving. Other than that, when sitting on my desk the Lenmar charger is a very reliable product.

Read Best Reviews of Lenmar PPUKSALL Kickstand Battery 2.0 - External Battery and Desktop Stand for iPhone and iPod Here

The unit is easy to use, charges quickly and works well with my iPod Touch (4th gen.)

The feel and appearance is pleasing.

PowerFilm AA Foldable Solar Charger

PowerFilm AA Foldable Solar ChargerThis charger does exactly what they say it does. It charges batteries using sunlight, even indirect sunlight. They must have changed their design slightly since the earlier reviews because mine came with a charge indicator to tell you when the charge is complete. It also has overcharge protection built in so you can leave batteries in the holder as long as you want.

The whole thing folds up into a package slightly larger than the 4 cell battery compartment. It weighs about as much as the batteries. With 4 x AA batteries installed it weighs about 8 ounces. It has arrangements for hanging it from a pack by lanyards, so you can charge on the go while you hike. This, combined with the light weight and small size make it an ideal source of electricity for back country backpacking.

Be aware that it only charges AA batteries. You can't plug in your laptop or your blackberry...or even AAA batteries, so plan accordingly. Mine charges AA batteries very quickly. They say that 4 hours of fairly bright sunlight will fully charge 2 AA batteries and 8 hours is supposed to charge 4 AA fully. Since I don't ever run my batteries down that low, I can't vouch for these times, but it will top off a partially drained battery in about an hour. Even on a cloudy day, it can top off 2 batteries in less than 2 hours. That is comparable to any AC charger I have ever used.

It uses a thin film photovoltaic array, so it's flexible. This is both good and bad. The thin film is much cheaper, less prone to crush damage and folds up smaller, but it's probably only good for about 5 years use, roughly 1/4 of the life span of more expensive cells. This time limit only applies to the time actually spent in the sun. The clock stops whenever it is stored in darkness, so if used only for camping or other outdoor or emergency use, it should last pretty much forever.

This is not supposed to be an outdoor solar panel to mount on your roof. It's a very tiny charger for emergency power (or camping). If you take it for what it is, this is a great product.

I purchased this charger in case of long term power outage (earthquake, ice storm, nuclear war, cap and trade-caused blackouts), with the intention of always having light by recharging AA batteries and using them in LED flashlights and lanterns.

I used this charger on Oct. 24 on a sunny day in central Illinois, on a pair of partially discharged NiMh 2400 maH batteries that read 1.2 volts. The charger brought them up to 1.36 volts quickly and showed them as fully charged. Impressed, I decided to purposely discharge a pair of AAs by running them in an incandescent flashlight. One battery read 0 volts and the other was at 1.0 volts and the filament of the bulb was just barely showing a red glow when I put them in the charger. The charger accurately diagnosed them as very low and started recharging them in a trickle mode. One trip to Walmart later, (1-2 hours total charge time) and both batteries were right at 1.36 V. I also ran a separate 4-pack of partially discharged batteries and they were charged fully in 1 hour.

Based on this small experience sample, I am very happy with this product, as it surpassed the charging times on the box on a sunny day, even in late fall, with the sun very low in the sky at mid-day.

I also feel the build quality of the product is high, based on first impressions only.

This charger is also very small, folding up into a box smaller and thinner than I expected. It also comes with a 4-pack of the excellent low-discharge Sanyo Eneloop batteries, which are a $8-10 dollar value.

It also has grommets to make it easy to use string or cord to affix it to a backpack or tie it down in windy conditions. I am planning on making a set of copper wire supports that can be used like tent stakes to hold this charger in place on flat ground or to prop it up to get true perpendicularity to the sun to maximize the energy capture.

In summary, I love this charger and highly recommend it.

Buy PowerFilm AA Foldable Solar Charger Now

I recently purchased this charger's cousin, the Powerfilm USB / AA Solar Charger, and was so impressed with that one that I decided to get this one, too. I was not disappointed; this one is just as high quality as the USB version, only it trades 2 AAs for a USB charging device. These are without a doubt the best small AA-type chargers I have ever used (I've been though about a half dozen). These are ideal for either power outages of those trips in the wild where you will be without civilization for awhile. Truly wallet-sized, yet can keep your AAs going until they finally die on you.

Well worth the money.

Read Best Reviews of PowerFilm AA Foldable Solar Charger Here

Been into Solar Chargers for the past 6 months. Interest in solar charges grew from wanting to be prepared for emergencies. The electronic devices that I have are powered through AA, AAA, and USB sources. Therefore, my focus was on finding a solar charger that can power one or any combination of the three. This is the review of the PowerFilm AA Battery Solar Panel Charger.

I was hopeful for this solar charger would be able to charge AA batteries. On the positive side, this charger did appear to have some ability to charge certain AA batteries with a significant charge. The panels and nylon material appear well made. Overall, this is a very lightweight and compact set up. In addition, there are two red LED lights that indicate a full-charge with a constant on, charging with a single blink, and indicates an empty charger or low battery with a quick two-blink sequence.

Unfortunately, the charger did not work with a lot of my Sanyo Eneloop LSD, Energizer NiMH, and Duracell NiMH. I tried troubleshooting by using both newer and older batteries, charging two batteries at a time versus four at a time, using the three different brands mentioned, using the solar charger during peak hours in direct sun and also indirect sunlight, charging for two-days in a row to ensure enough charge time, and switching between any of the four AA slots on the charger. Most of the batteries would result in a quick two-blink (empty charger or low battery) no matter the arrangement or length of time in the charger.

Of the batteries that were accepted by the charger (couple of Eneloops and four of my Energizer NiMH AA batteries), those batteries never fully charged. I tried leaving the batteries in for two days of sunlight, but it made no difference. I compared the charge on the batteries to ones that were charged by my Sanyo Eneloop USB AA/AAA charger and Energizer Charger. The Sanyo Eneloop and Energizer chargers resulted in batteries with a full charge, while this PowerFilm charger left the batteries approximately 70 percent charged at best.

Overall, I rate this PowerFilm AA Battery Solar Panel Charger a 2.0 out of 5.0 stars. It got two stars for what appears to be good build quality built into a compact and lightweight design. It did charge some of the AA batteries, but I could not make any distinctions on what characteristics made it possible to charge the AA batteries that it did. Still, the batteries that could be charged, were not able to charge completely. The lack of overall and dependable function is the reason why I docked 3 stars. I wanted to like this charger, but it was a disappointment. Perhaps I got a defective unit. I will continue to seek a dependable, compact, lightweight, and durable source of solar power.

Want PowerFilm AA Foldable Solar Charger Discount?

Used it yesterday for the first time to charge 4 Eneloop AAs. Put it in the window, came back 6 or so hours later to find them fully charged!

Folds up nicely. Has velcro to keep it tightly wrapped when not in use, and several metal grommets for securing with 550 cord.

Save 25% Off

DEWALT DC823KA 18-Volt 3/8-Inch Impact Wrench

DEWALT DC823KA 18-Volt 3/8-Inch Impact Wrench
  • Frameless motor with replaceable brushes for extended tool durability and life
  • Compact size and lightweight design allows user to get into tight spaces when performing applications
  • 1,500 in-lbs of torque to perform a wide range of fastening applications
  • 0-2,400 rpm/0-2,700 ipm for faster application speed
  • Replaceable brushes for increased serviceability;Textured ant-slip comfort grip provides maximum comfort and control

Bought this because I had a big job out in the field that required about 1000 5/16" thread-forming bolts going into 1/2" plate. All I have to say is wow! This thing has power!! It drove those bolts in like I was driving them into styrofoam!! Now I use it all of the time! For the price, being that two batteries a case and charger are included, this little dewalt cannot be beat!! I've had it for about a year and it's just as strong as the day I got it, and being used industrially I think that says alot!!!

Buy DEWALT DC823KA 18-Volt 3/8-Inch Impact Wrench Now

This came with 2 XRP battery packs but is ready for the li-ion cells (it has the dual compatible base). It does have an LED for the work area that comes on with the slightest press of the trigger even before the spinning starts. It has a variable speed drive

Dewalt gives you 3 choices in drive size 1/4 , 3/8 (this one ) or 1/2". I chose 3/8 and had to look hard for it because I wanted to use my 3/8 sockets I already owned. I have a dewalt 1/2" impact wrench with 1/2" sockets that runs on 110 vac so this is my "tiny" solution for nuts. As for 1/4" drivers, I'm deferring that size to the small power screwdriver type low torque drivers.

I was surprised how hard it was to find a 3/8" drive my sockets are all 3/8 and this has the nice snap ring holder so it's a great system altogether. It comes in a black carry case with 2 batteries and charger, which I don't need another one. I would have bought the tool alone but at the time I could not find the tool with these features and no batteries, and I needed some new batteries anyhow.

The gearbox is great, as with all dewalt drivers. It's the right drive size for an 18v battery driven system.

Read Best Reviews of DEWALT DC823KA 18-Volt 3/8-Inch Impact Wrench Here

Really nice, small impact wrench. Powerful enough for most jobs requiring bolts not larger than 1/2". If you need a wrench for larger bolts get the 1/2" drive model.

Want DEWALT DC823KA 18-Volt 3/8-Inch Impact Wrench Discount?

This Impact Wrench is more than I thought it would be. It is light and does a terrific job at what I use it for, which is building wheel chair ramps.

Save 59% Off

I already have had two snap-on impact guns 14.4 volt and 18 volt neither touch this one and they costed a lot more... I am very very pleased..

Skque White 1000mAH Usb Wall Charger for Apple IPOD\New Iphone 4 Generation

Skque White 1000mAH Usb Wall Charger for Apple IPOD\New Iphone 4 Generation
  • Charger Input:AC 100V-240V 50Hz 130mA
  • Output:DC 5.0V +/- 5% 1000mA +/- 50mA
  • Works with any USA style wall outlet
  • Smart design with built-in charging circuitry to prevent overcharge
  • Nice feature with LED charging indicator

I wonder if this adapter has anything inside it? I bought it for my IPad 2. A text comes up and says not working. At $2.99, it's hardly worth returning. I bet that's what the manufacturer counts on!

Buy Skque White 1000mAH Usb Wall Charger for Apple IPOD\New Iphone 4 Generation Now

The product was as advertised in Amazon. It is light and works really good. The delivery was made on time. Overall, satisfied with this. Will recommend !

Stanley BC209 Battery Maintainer

Stanley BC209 Battery Maintainer
  • High frequency automatic battery charger/maintainer
  • Magnetic back for easy mounting
  • Foldable hanging hook and dual mounting bracket for easy temporary or permenant installation
  • Rubber covered metal battery clamps
  • O-rings and DC plug

I am using this as a battery maintainer. Seems to work fine. It is a higher quality case and wiring than the Schumacher units I had used in the past. These are a buy again.

Buy Stanley BC209 Battery Maintainer Now

This appears to me to be the same BC209 as the more expensive all yellow version. This one is advertised as a maintainer but the directions and box refer to it as a maintainer/charger just like the yellow version. The paperwork is dated 2011 so it is a up to date model. I bought this to maintain my starting battery in my motor home while in storage which is most of the time. The "house" charger in the motor home only maintains the house battery (not the starting battery)so I was going through starting batteries way too fast from lack of use. The charger does exactly what I wanted which is slow charge then maintain the battery level. The included plug adapters are all nice quality. I chose to use the cigarette lighter adapter and it works great. The light indicates when it is charging and when it is charged. The unit runs without making any noise at all. I actually put my ear to the box and could barely hear a slight hum. From 1 inch away you can't hear a thing! Also there is no odor from the unit either. I could not be happier and highly recommend this product. Now when it is time to travel I can just start her up and go!

Read Best Reviews of Stanley BC209 Battery Maintainer Here

This charger works as good or better than chargers costing 5 times more. I bought 3 of them to use during the winter. Great value!

Want Stanley BC209 Battery Maintainer Discount?

The Stanley BC 209 Battery Maintainer is one of the worse battery maintainers that I have used/purchased. The charger gets extremely hot, has wide range in charging voltages (13-15V), and for me, stopped working after 6 months. The overall design is basic and feels cheap.

Save 1% Off

Stanley BC209 Battery Maintainer

Im currently trying a Stanley BC209 (black case)trickle charger I bought in the past few months & so far I like the flashing LED for charging & a solid light for charged.

The cables are rather long (good or bad depending on use) but does have a detachable (from the batt) plug.

Its very versatile with its 3 outputs & 3 mounting options.

OTHERs I used (BELOW)

The Schumacher & the Sears chargers look the same in every way EXCEPT for the brand sticker.

Ive had both (2) so called different brands to stop working (with-in 5-10years) but still have a 3rd charger that is still working(in-which was my newest).

I had 2 permanently mounted, 1 in my boat, 1 on my lawnmower & the 3rd one I made removable from my jet-ski.

As for the short cables (AC & DC sides) I liked & disliked the lengths depending on the mounting location LoL.

Over time things I noticed was;

1)one half of the plastic had cracked in half on the one on my lawnmower.

The green LED was on & the red LED would just flash & not charge.

2)the green LED stayed on but would not charge (no steady red light) on the one in my boat.

I read in the reviews about someone not loosing fluid level in there battery from charging BUT I noticed (over like 2 winters) I would have to top off the fluid levels back off in the battery's the following spring ("in which was normal").

I ended up using a timer to activate my chargers through the night to try & reduce this fluid level drop but did notice when I dropped power the green LED would stay lit using the batteries power.

Schumacher SE-1-12S Fully Automatic Onboard Battery Charger 1.5 Amps

Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control

Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control
  • Connects to a 12 volt battery and converts DC to AC pure sine wave for power on the go
  • Ideal for power failure emergencies and guarantees optimum compatibility with sensitive equipment, computers, motors, televisions and more
  • 2000 Watts surge power, 1000 continuous power
  • Safety features include: an overload alarm and LED light, a soft start system, low battery shut down, DC input overload voltage, output overload, overload temperature, short circuit shut down, and a high speed cooling fan
  • System includes: two 110V household electrical outlets, a DC/AC power inverter remote control modular connector cable and key chain remote

I bought the inverter to use in an RV to power lights, TV/DVD, and other light AC loads. The price on this unit is very attractive so I bought it and checked it out before installing. I tested it under light and maximum loads and even hooked it up to an oscilloscope to verify if it was really a sine wave output. The last thing I did was bring it in the house to power the TV, stereo, computer, DVD, and VHS player simultaneously. (This is still well under 1000W.)

Conclusions:

(1) Powers all loads I've thrown at it without a problem (except see #4# including electronics, 1000W electric heater, fluorescent and incandescent lights, and an electric drill.

#2# Has a real sine wave output.

#3# Causes considerable interference to AM radio when used to power the stereo system, but absolutely no interference on the TV or FM radio or anything else.

Strangely, the TV guide function on the cable box stopped operating, but I can't be sure if the inverter caused this.

But the really bad part:

#4# It has unexplained shutdowns. This usually happens under light loading conditions. The unit shuts down and displays an error code of OST #overload# or 529 #inverter defective#. The unit was not overloaded #not even close) any of the times this has happened. And when it happens, you have to turn it off and wait several hours to turn it back on. I think it has to lose its memory of the error before it will operate again.

I will probably be contacting the manufacturer regarding this problem. The unit is no good to me if it doesn't work reliably.

Buy Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control Now

I have several 1000W inverters in my service trucks and thought the idea of a RF remote would be nice so I stepped away from my usual brand (Xantrex) Xantrex Technologies 806-1000 Prosine 1,000-Watt Inverter and their newer, more value conscious true sine inverter product line which is within $20 of this sunforce unit but lacks the features. This time I bought the sunforce.

First off, testing finished inverter installations, I use a 1050W load (it's a heat gun with 1000W heater and 50w blower). True, this is MORE than 1000W but all inverters have some surge capacity so it's never been a problem before. The sunforce unit's efficiency is within 1% of xantrex, requiring 114-116 AMPS at 12VDC to operate the 1050W load, however the sunforce will shutdown within 3 seconds with an output overload condition, while the xantrex units will drain the battery first.

I stepped the load down to 900W and things were fine, so I'm really going to overlook their slightly over-rated specifications on the inverter because my loads are in the 300-400W range and need clean power. Besides, the value proposition with sunforce's feature set is still there.

Another pro/con to consider is that the Xantrex units are metal cased with mounting holes, while these are plastic that may lead you to some innovative mounting solutions, but it's not a big deal.

Neither Xantrex nor Sunforce has developed a "everything easy to read display" my -806 model xantrex prosine comes close with a remote mountable on/off plate w/ lcd that shows volts, amps, and watts as a bargraph simultaneously. But the Xantrex LCD display is smaller than some digital watches and can't be read across the truck cab, which forces me to remote mount it. Sunforce uses BIG digits that are red LED, but it cycles through output voltage, amps, etc by pushing a button it will only stay on one value for 1 second. The problem is unless you are pressing the button it defaults to AC volts, where battery voltage might be more useful

Sunforce did something really clever. Inverters of this power level are not easy to wire in (4' of #4 wire is about all you get to the battery before wire losses cut into your power conversion). The knobb-ish looking thing in the upper right of the product photo is a rubber cover for a high current 12VDC socket. You did all that wiring to hook this up, might as well get a cig lighter socket that shares the same big wires.

A good source of wiring is available on amazon and I've reviewed them Cobra CPI-A4000BC AC Power Inverter AWG Cables although if you really need 1000W keep a battery within 4 feet a second battery like the Optima Batteries 8052-161 D31M BlueTop Dual Purpose Battery optima deep cycle is a good setup as it can be mounted close to the inverter and charged from the vehicle alternator. Be sure to use a battery isolator so that your inverter can not drain the vehicles' starting battery.

If your use involves ALOT of runtime at 1000W a parallel combination of 2 D31 batteries will run longer without running the engine. For near constant use, use a 124 Amp alternator and you will need to run wires back to the vehicle power system and run the engine to provide power.

The Xantrex series will give you much more surge power to 1500 W if needed for 30 seconds. Sunforce has created a clever product that comes with 3 remote on/off switches in the package. All inverters have some feature you may want here it was the remote, some Xantrax models offer AC cutover to battery when an outside power source disappears. You do get alot in this model for a good price. My unit gets daily use and has not had a problem. Best advice is shop around the old models that were $600-700 have come down to the $200-300 range. Oversize the unit for your use because all AC loads have startup surges, especially lighting loads and motors. I generally double the inverter size.

No matter what brand you end up buying, a TRUE Sinewave inverter like this will give you utility quality power. After nothing but bad experiences with pseudo-sinewave (there are lots of names for it, but NOT real sinewave) units frying expensive equipment over time. Those units are only good for incandescent lights, and even those burn out faster!

Read Best Reviews of Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control Here

Bought this off Amazon a month or two ago. I was looking for an inexpensive pure sine wave inverter to replace my Duracell (Xantrex) modified sine wave inverter. I was expecting to have issues from the get go (due to the cheap price!) but this inverter is working out quite nicely. I have it hooked up to 4 Trojan T-105 batteries which is charged up with an 85 watt Kyocera solar panel and Xantrex C35 charge controller.

Being pure sine wave, I can run anything now that my old modified sine couldn't. No more annoying buzzing sounds from CFL's or TV's. certain appliances that wouldn't power up on the old inverter now work flawlessly. Some things I run on the Sunforce: Samsung 22" LCD TV, CFL's of all sizes, Playstation 2, battery chargers, laptops, electric cooler.

I haven't tripped the over current protection yet at all, not even when using items that typically surge, such as a large power drill.

No fan issues like the other review mentioned.. in fact I haven't heard it come on at all yet; then again it's winter time here in Missouri so I assume it truly is thermal controlled.

The remote keychain that was provided with the unit works great. Since I'm doing the electrical work on our new cabin, I can turn off and on when working on the electrical. Then turn it off when we leave for the week.

The only issue I've had so far is once I came back on the weekend and the inverter turned itself back on sometime during the week. This normally wouldn't be a big issue except we're limited on battery capacity and can be a nuisance if kept happening. This has only happened the one time so no biggie.

The LCD readout on the front of the inverter is a nice feature, more expensive inverters don't have this by default, though I rarely look at it.

I would like to determine how much power the inverter uses when it's powered on and in idle mode. The documentation doesn't mention this anywhere and would expect that would be a major selling point. (or, disadvantage if it's too much of a power draw). I don't have an amp meter to test what it is, if you find out please post a review.

The only other downsides is:

1) this inverter has no permanent mounting brackets. only rubber feet on the bottom. luckily the thick DC cabling keeps it well secured within the battery box.

2) the DC hookups are HAND TIGHTEN only. This can be an issue if you, like me, use the proper gauge wiring. in my case I'm using 6 gauge, which is actually borderline of being too small but the batteries are close by. I ended up using pliers to tighten the hand lugs. With thicker wiring, I imagine this would be a huge pain.

PROS:

inexpensive! I noticed the price just went up though :(

LCD readout on front panel

Keychain remote, I haven't seen any other inverters include this with the inverter itself

CONS:

no mounting brackets? I'm sure you could finagle some aluminum straps around it, instead.

hand tightened DC connections

no mention of idle power usage.

Want Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control Discount?

First off. My battery backup flagged this product as "Building Wire Fault".

The product showed 119volts at 58hz. My lights flickered like I was in the early 1900s.

After checking all my indoor wiring and power strips, only this inverter remained.

Dismantling this product, the side "Heat-sinks" proved to be plastic. Worthless props.

I discovered the connections from the AC plugs had the "hot" connection soldered into the

ACN (neutral) and the neutral wire soldered into the ACL (load).

I soldered the wires into the proper positions, and after re-installing, still received

the "Building Wire Fault". I took the product apart again, and after discussion with another electrical technician, we concluded this product had no ground included on the neutral side

of the AC. I soldered a wire to the neutral side, and attached a ring terminal to the ground

screw in the back of the device. Reassembled, and re-installed, flipped the switch, and have

a functioning product. It now reads a steady 121 volts at 60.3hz steady. My lights don't flicker.

My power supply shows a properly grounded device. I am writing this review on the power from the

inverter. Bottom Line. VERY dangerous product. Not compliant for USA standards, and I don't feel

the average person on the street wants to have this "Shock Hazard" in their home. Just Saying....

Save 61% Off

I've had the Sunforce 1000w inverter for a couple of weeks now. Like a kid with a new toy, I had to try it on a couple things.

1. Bass guitar amp First thing I noticed was the static noise was a lot louder than when it was plugged into grid power. I guess the power isn't as clean as it should be for a pure sine wave inverter.

2. Rice cooker It drew around 600 watts according to my Kill-A-Watt. The inverter cooling fan was turning on and off very frequently during cooking. When the rice cooker was done and went to "keep warm" mode, it was only drawing 40 watts but the cooling fan still turns on and off for a while until I unplugged it. I can see the fan turn on for any draw over 500 watts, but 40 watts???

Pros It works. Cheap price. Cool remote power unit. Power information display panel.

Cons Like other reviews, no way to mount it. Fan turns on at really low power consumption. The heatsinks are plastic and serves no real purpose. You would think if they used real heatsinks, it would've provided better passive cooling to minimize cooling fan operations. The big thumb screws for the battery power leads doesn't tighten good enough, better to replace them with nuts and washers from a hardware store.

I give it a 3 1/2 star.

Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams

Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams
  • Stops leaks
  • No tank removal
  • Permanent
  • Complete in minutes

This plastic tank repair kit is great. Worked well for my application. I have a split in my tank due to the weight of the tank being put on the strap, so I sealed it with this. Seems to be holding...

Buy Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams Now

I have used this product many times over the years and have never been disappointed. I always keep an unopened pack with me whether on the road or parked. If you've never used the product, the short 8 9 minute mix & setup time might surprise you even though the instructions are quite clear about this ... mix for no more than 2 minutes and apply immediately. Expert tip ... mix small quantities not the entire packet and do the repair in stages as needed. The packets/pouches are designed to be mixed before opening, but you can cut a corner off each pouch and dispense as little as is needed. A couple of clothes pins can be used to reseal the pouches temporarily. The pack comes with an applicator brush but it can only be used once ... a used-but-clean toothbrush will work just as well. An RV vacation/trip can be spoiled by a punctured holding tank this product can save the day. Great product.

Read Best Reviews of Versachem 90214 Plastic Tank and Radiator Repair Kit - 30 Grams Here

its messy, and you should wear gloves. I patched a rather wide crack in my windshield washer fluid tank on my car. I wanted to try this fiberglass patch before i went looking for a junkyard or aftermarket tank, and started removing components under the hood. I watched a few youtube videos on how to patch fiberglass, and i was able to do a rather nice job on the tank i needed to patch.

I recommend this for anyone who knows what they're doing. Its a good solution to an annoying problem

Cobra MicroTalk FRS220 2-Mile 14-Channel FRS Two-Way Radio (Charcoal)

Cobra MicroTalk FRS220  2-Mile 14-Channel FRS Two-Way Radio
  • Up to 2-mile range and access to all 14 FRS channels
  • 500 milliwatts of output power, maximum allowed by law
  • Audible incoming-call alert
  • External slide switch lets you change between 2 FRS channels
  • Backlit LCD display for nighttime use

I just bought this radio not to long ago... I am VERY happy with it! It has features that the more expensive Motorola TalkAbout FR60 does not have, such as a lock (so if you have it in your pocket and a button is pressed mistakenly, nothing will happen!),LCD backlit display,a bendable antenna, and belt clips (you would have to pay EVEN MORE for this on the FR60)! It has excellent clarity, easy to use buttons, a Call button, 14 channels, 38 subcodes (so other people cannot annoy your conversation!), and much more! The only thing I would like on this Cobra is that it would have better clarity with people in a longer distance (about a mile and a half, you cannot hear at all, depending on the surroundins). I definitely reccomend this Cobra radio! If you are about to buy the Motorola FR60, drop your credit card and turn to the Cobra FRS 220 2-way radio!

Buy Cobra MicroTalk FRS220 2-Mile 14-Channel FRS Two-Way Radio (Charcoal) Now

I have recently purchased the Cobra 220 2 way radio set. for use to keep track of kids in parks and Malls. This is a great Product with channel lock and Phone like ring alert We have yet to find an area where it will not work even in the largest mall we had great reception.. I recommend this product to any parent with free roaming Kids..

Read Best Reviews of Cobra MicroTalk FRS220 2-Mile 14-Channel FRS Two-Way Radio (Charcoal) Here

When I got this radio, it was more that i could hope for. I use these radios for everything. They are great for fairs and amusment parks, to keep in touch if members of your party go seperate ways.

Want Cobra MicroTalk FRS220 2-Mile 14-Channel FRS Two-Way Radio (Charcoal) Discount?

I just got these walkie talkies for the holidays. As soon as I opened the battery back thing, it broke off. But, otherwise its great for just talking to people. It has great radio reception and is loud and clear.

Well worth the money...

Still going great after 13 years. The battery's finally gave out 2 years ago I think, along with the charger but oh well. The triple A option still works.

Hitech - Car DC Adapter wth USB Outlet for MP3 Players, Digital Cameras, Cell Phones, PDAs

Hitech - Car DC Adapter wth USB Outlet for MP3 Players, Digital Cameras, Cell Phones, PDAs
  • Charge your electronic gadgets using car cigarrette lighter with Hitech H-PI1006
  • H-PI1006 is DC to DC converter with USB outlet
  • It can charge any electronic devices that are USB enabled
  • Just simply connect your USB cable to H-PI1006 and to your electronic device
  • H-PI1006 incorporates safety features such as short-circuit protection and automatic overload cutoff

Product allows you to play devices but is not functional as a charger for them.

Buy Hitech - Car DC Adapter wth USB Outlet for MP3 Players, Digital Cameras, Cell Phones, PDAs Now

This adapter is HUGE compared to many others on the market and it broke within the first couple weeks. I would not recommend this to anyone.