- Tool only with no battery, frameless motor for extended tool durability and life
- Compact size and weight allows access into tighter areas and reduces user fatigue
- 1,330 in-lbs of torque to perform a wide range of fastening applications
- 0-2,400 rpm/0-2,700 rpm for faster application speed
- Replaceable brushes for increased serviceability;textured anti-slip comfort grip for maximum comfort and control
I actually got this tool when I bought the 6-tool set that comes in a contractor bag. I really bought the set for the reciprocating saw, the circular saw, the grinder, and the "normal" drill. My attitude toward the impact driver was more or less, "eh, that thing looks pretty wimpy". Well, that was two months ago, before I completely re-framed half of a house. This is now the most used tool I own. I can drive 3 1/2" screws into studs and headers all day long, one handed. As long as I'm driving straight, I will never strip out screw heads with it. In fact, the worst problem I have is breaking bits. The DeWalt "Impact Ready" bits are the worst. I will sometimes break a bit after only one screw. That should give you an idea of the torque and power this thing generates! The good news is that I did find that, surprisingly, Kobalt bits seem to hold up very well for some reason. I can sometimes get 50 screws driven with one Kobalt bit! I'm talking 3 1/2" screws into yellow pine, by the way. If you're driving 2" screws you'll go all day with one bit. Get the Kobalts, though they're $13 for a box of 50 at Lowe's. The DeWalts are something like $7 for 5 bits which are good for about 10 screws total before they all break.
It may seem intimidating that it breaks bits, but don't worry, my 97 pound girlfriend has no trouble at all using this thing. Really it's unbelievable. There is simply no way to put into words how well and easily this thing drives screws. It seems impossible. The days of leaning into the back of a regular drill with all my weight, just to have the screw head strip out millimeters from being set are over!
I'm buying one of these for my brother for his birthday it's the best gift I could possibly give to someone that does any kind of carpentry or drives fasteners. Absolutely worth every penny.
PS. I know this review is over the top, and I'm sure there are other drivers that perform just as well, but my experience with this tool has been just great, so I wanted to share it with the world! Thanks for reading!
Buy DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver Now
I own 9 impact drivers from 3 different manufacturers and my old Dewalt (ni-cad style) was my least favorite of the group but this new one (which is made for the new 18v Lithium-Ion type batteries but works with all my old 18v ni-cads) is top notch. Dewalt has apparently fixed most of the problems found in the old ni-cad style impact guns (like excessive bit wobble) and added a light like the Makitas and Ryobis have. Now more compact and more powerful than the competition. A definite winner.
Read Best Reviews of DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver Here
I use this tool to drive drywall and lag screws. I have not had any problems. The redesigned tool is smaller than the older one and the led light has made this tool even better.
Want DEWALT Bare-Tool DC825B 1/4-Inch 18-Volt Cordless Impact Driver Discount?
Not long ago a friend gave me an extra DeWalt 18 volt drill he'd come into. I'd been using a 12 volt Makita for over a decade, and I was impressed with how much more torque and battery life the DeWalt had. The same friend also had a DeWalt impact driver from the same series, and again, I was impressed how well this handled mechanical tasks usually relegated to a pneumatic impact driver. But even more impressive was how well the DeWalt worked for driving screws.
A few years ago, the major cordless tool makers started to come out with impact drivers which they marketed not to mechanics, but to carpenters. While today's 18volt cordless drills do a pretty good job of driving screws, they still start to bog down when driving really long screws into hard or resinous wood. The slow, stall, and eventually overheat. But impact drivers don't do this. They work on a different principle, using a motor-driven hammer to repeatedly strike an anvil that drives the output shaft. As the load increases, they switch from spinning to a rapid-fire staccato impact mode, in which every impact turns the screw a bit farther, while the motor continues to spin and bring in cooling air.
I was very pleased to discover that Amazon had a DeWalt impact driver available in a batteryless and caseless package (for those of us who already have a charger and several batteries) for about $125. I purchased mine for a mix of yard projectsthis is a great tool for driving the big screws used to tie landscape timbers togetherhome projects, and motorcycle/scooter maintenance. And amazingly, it's even lighter and more compact than the DEWALT DC759KA Heavy-Duty 18-Volt Ni-Cad 1/2-Inch Cordless Drill/Driver Kit. I'm giving away my Makita 12v drill/driver to a nephew who likes tools and gadgets, and switching 100% to the DeWalt system.
I bought this last year after my Black and Decker 18v drill died it's 3rd death. I got it in a 4 tool combo kit on sale at Lowes. I build haunted houses for the Halloween season so most of what I do construction wise is with rough and sometimes very old and hard woods. The woods are also made super tough (like rock) from a chemical that must be sprayed on them to make them fire retardant. I found that before, even with an 18v drill that screws would shear off before going into the boards which made it difficult to make secure connections in the wood. It is hard to make something look old and spooky and still have it be safe so having good, solid tools is a must. Right after I charged the battery I tried this tool out. Wow!! It drove a 3 inch deck screw into an old hardened 2x4 in the blink of an eye!! I had never used a tool like that. It quickly became a favorite of mine on the jobsite. I used it hard and it never once let me down. I bought it toward the end of the build so I only got to use it on a few hundred screws but never a disappointment. I'm looking forward to using on this season's build as well as in my volunteer work with Habitat for Humanity. I would highly recommend this tool to anyone who builds.
